Hall

eddyem·stm32samples·F1:F103/Hall_linear/kicad/Hall.kicad_pcb

Hall PCB layout, top view — open source STM32 board by eddyem

About the Hall PCB

Hall is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board measuring 45.3 × 46.9 mm, with 34 components from 27 distinct parts.

Its main chip is the BME280, from the STM32 family. Other key parts include the STM32F303CBT6, ISO1050DUB and 74HC4051. By type, the board carries 10 resistors, 9 capacitors, 6 connectors, 4 ICs, 3 diodes and 1 transistor.

It belongs with the sensors designs in this gallery.

From the project

Code samples and ready projects based on bare-metal STM32

- BMP180 - I2C temperature/pressure sensor BMP180 - BMP280 - I2C temperature/pressure sensor BMP280 and temp/pres/humidity sensor BME280 - Canonmanagingdevice - device for independent managing of some Canon lens - canUART - UART-CAN bridge - chronometerv3 - chrono-3 - DHT22DHT11 - DHT11 and DHT22 humidity/temperature sensors management based on timer+DMA - DS18 - DS18x20 temperature sensor management - F1testbrd - code for universal testboard for STM32 in LQFP48 package - I2Cscan - simplest I2C scanner, can read and write registers - inc - base includes - ledblink - simple blink - LEDScreen -…

Main components on the Hall

Hall bill of materials (BOM)

34 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BME280
STM32F103C6Tx
U1
1
STM32F303CBT6
LM1117-3.3
U2
1
ISO1050DUB
USBLC6-2SC6
U3
1
74HC4051
MCP2551-I-SN
U4
1
B0505S-1W
DTA114Y
Q1
1
8MHZ
NX5032GA-8MHz
Y1
1
SWD
J1
1
5v
J2
1
Sensor
J3
1
GND
J4
1
3v3
J5
1
USB_C_Receptacle_USB2.0_16P
J6
1
SS14
D1
1
PESD1CAN
D2
1
SMAJ5.0A
D3
2
0.1
6
C1, C2
1
1u
C3
4
0.1
C4, C6, C7, C8
1
0.1
C5
1
22u
C9
Show 7 more
QtyPartRefs
1
10K
10k
R1
1
4K7
10k
R2
1
330
10k
R3
2
330
22
R4, R5
1
330
1k5
R6
1
330
120
R7
3
330
4k7
R8, R9, R10

Hall design files

The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.

Hall: common questions

What microcontroller does the Hall use?

The Hall is built around the BME280, from the STM32 family.

How big is the Hall PCB?

The Hall measures 45.3 × 46.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hall?

34 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hall design files?

From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hall design in my own project?

The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hall without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in stm32samples

Similar boards