Nitrogen
eddyem·stm32samples·F3:F303/NitrogenFlooding/kicad/nitrogen/nitrogen.kicad_pcb
About the Nitrogen PCB
Nitrogen is an open source STM32 PCB design by eddyem, published on GitHub. It is a 4-layer board measuring 80 × 80 mm, with 136 components from 89 distinct parts.
Its main chip is the STM32F303CBT6, from the STM32 family. Other key parts include the BME280, ISO1050DUB, 74HC4051, PC844 and LM2576HVS-5. By type, the board carries 53 resistors, 22 capacitors, 17 connectors, 13 diodes, 8 ICs and 8 transistors.
It belongs with the sensors designs in this gallery.
From the project
Code samples and ready projects based on bare-metal STM32
Automated liquid nitrogen flooding machine ====================================
(all GPIO outs are push-pull if not mentioned another)
- Channel 1 - ADC1 - Channel 4 - SPI2 Rx - Channel 5 - SPI2 Tx - Channel 6 - I2C1 Tx - Channel 7 - I2C1 Rx
Main components on the Nitrogen
Nitrogen bill of materials (BOM)
136 components, 89 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 MCP2551-I-SN | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | STM32F303CBT6 USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | ISO1050DUB MAX3485 | SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 74HC4051 STM32F302VBTx | LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | 74HC4051 BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | PC844 LM2576HVS-5 | TO-263-5_TabPin3 | U6 |
| 1 | PC844 LM1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | LM2576HVS-5 LM1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 1 | B0505S-1W AOD4184 | TO-252-2 | Q1 |
| 1 | B0509S-1W AOD4184 | TO-252-2 | Q2 |
| 1 | SI2308 AOD4184 | TO-252-2 | Q3 |
| 1 | B2424S-2W AOD4184 | TO-252-2 | Q4 |
| 1 | B0505S-2W DTA114Y | SOT-323_SC-70_Handsoldering | Q5 |
| 1 | SI2300 | SOT-23_Handsoldering | Q6 |
| 1 | IRF9310 | SO-8_3.9x4.9mm_P1.27mm | Q8 |
| 1 | SI2305 | SOT-23_Handsoldering | Q9 |
| 1 | 8MHZ NX5032GA-8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | ADC8,9 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2, J3, J13 |
| 3 | IDC2.54_02x05 | IDC-Header_2x05_P2.54mm_Vertical | J4, J10, J11 |
Show 69 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Power | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J5, J12 |
| 1 | ADCext | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | Prog | PinSocket_1x06_P1.27mm_Vertical | J7 |
| 1 | USB_B | USB_B_TE_5787834_Vertical | J8 |
| 1 | RS-485 485/CAN | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | U3/U4 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J14 |
| 1 | I2C/U1 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J15 |
| 1 | buzzer | PinSocket_1x02_P2.54mm_Vertical | J16 |
| 1 | LEDs | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J18 |
| 1 | SOLDERJUMPER_2_OPEN CAN | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | SOLDERJUMPER_2_OPEN USB5V | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | SOLDERJUMPER_2_OPEN MCU | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | SOLDERJUMPER_2_OPEN 3v3 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4 |
| 1 | SOLDERJUMPER_2_OPEN Vadc | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
| 1 | SOLDERJUMPER_2_OPEN RS-485 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | 5Vusb | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | Vin | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 1 | Gnd | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | 24V 5V | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP4 |
| 1 | 3.3V | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP5 |
| 1 | 4.6V Vadc | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP6 |
| 4 | SS14 | D_SMA_Handsoldering | D1, D2, D3, D4 |
| 1 | MBRS130L | D_SMB_Handsoldering | D5 |
| 2 | PESD1CAN | SOT-23 | D6, D7 |
| 1 | CESD3v3 | D_SOD-523 | D8 |
| 1 | SMBJ30A SP0505BAHT | SOT-23-6 | D9 |
| 1 | PESD1CAN SP0505BAHT | SOT-23-6 | D10 |
| 1 | 1N5822 MM3Z7V5 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D11 |
| 1 | B340A 1N5822 | D_DO-201_P3.81mm_Vertical_AnodeUp | D12 |
| 1 | B340A SP0505BAHT | SOT-23-6 | D13 |
| 1 | 100U 100u | L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L1 |
| 1 | 2.5k@100MHz | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 2 | 0.1 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 1 | 0.1 6 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 6 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 8 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C10, C13, C14, C16, C19, C20, C22 |
| 4 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C11 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C12 |
| 1 | 47u 35V | CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C15 |
| 2 | 47u 6V | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C17, C21 |
| 1 | 47u 10V | CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C18 |
| 1 | 10K 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4K7 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 5 | 330 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R7, R9, R11 |
| 3 | 330 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R8 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 4K7 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 3K3 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 4 | 3K3 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R17, R20 |
| 2 | 3K3 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R18 |
| 1 | 3K3 120 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R19 |
| 3 | 560 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R24 |
| 1 | 120 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 560 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 2 | 560 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R27 |
| 2 | 560 1k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R29 |
| 1 | 1K5 1k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 2 | 1k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31, R32 |
| 1 | 10M 1k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
| 4 | 7.5 1k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35, R36, R37 |
| 1 | 7.5 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 1 | 7.5 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39 |
| 1 | 91K 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41 |
| 3 | 10K 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42, R43, R47 |
| 1 | 10K 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R44 |
| 2 | 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45, R46 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R54 |
| 5 | 330 | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5 |
Nitrogen design files
The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.
Nitrogen: common questions
What microcontroller does the Nitrogen use?
The Nitrogen is built around the STM32F303CBT6, from the STM32 family.
How big is the Nitrogen PCB?
The Nitrogen measures 80 × 80 mm, has 4 copper layers and is 1.66 mm thick.
How many components are on the Nitrogen?
136 components, from 89 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nitrogen design files?
From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Nitrogen design in my own project?
The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nitrogen without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32samples
- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license208 STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208STM32
Many485
eddyem
80 × 84 mm107 parts2LNo license208STM32
Stm32
eddyem
98 × 63.5 mm98 parts2LNo license208STM32
Mainboard
eddyem
58 × 35 mm86 parts2LNo license208STM32
Windshield
eddyem
66 × 54 mm86 parts2LNo license208STM32
Chiller control
eddyem
62 × 60.5 mm69 parts2LNo license208STM32
Servo control
eddyem
53 × 47 mm59 parts2LNo license208STM32
Encoder
eddyem
78 × 81 mm53 parts2LNo license208STM32
Shutter
eddyem
61 × 49.5 mm40 parts2LNo license208STM32
Hall
eddyem
45.3 × 46.9 mm34 parts2LNo license208
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k