Many485
eddyem·stm32samples·F3:F303/InterfaceBoard/kicad/many485.kicad_pcb
About the Many485 PCB
Many485 is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board measuring 80 × 84 mm, with 107 components from 36 distinct parts.
Its main chip is the STM32F303RBT6, from the STM32 family. Other key parts include the ISO1050DUB, MAX3232, ISO3086, LM1117MP-3.3 and USBLC6-2SC6. By type, the board carries 32 capacitors, 18 resistors, 13 ICs, 12 diodes, 8 connectors and 7 transistors.
It belongs with the sensors designs in this gallery.
From the project
Code samples and ready projects based on bare-metal STM32
Multiport board ====================================
- 1 CAN - 3 RS-485 - 2 or 1 RS-232 - 1 SSI or 1 RS-422 (in this case only one RS-232)
1. RS-485 (1) 2. RS-485 (2) 3. RS-485 (3) 4. RS-232 (1) 5. RS-232 (2) or RS-422 (by jumpers) 6. CAN 7. SSI (over SPI, by jumpers) or configuration interface (if "Config mode" jumper opened)
- IF1: RS-485 over USART3. - IF2: RS-485 over USART1. - IF3: RS-485 over USART2. - IF4: RS-232 over UART4. - IF5: RS-232 or RS-422 (by jumpers "IF5" and "SSI") over UART5. - IF6: CAN bus. - IF7: SSI (inaccessible when RS-422 selected) or interface for device…
Main components on the Many485
Many485 bill of materials (BOM)
107 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ISO1050DUB | SOP-8_6.62x9.15mm_P2.54mm | U1 |
| 1 | MAX3232 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ISO3086 | SOIC-16W_7.5x10.3mm_P1.27mm | U3 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | STM32F303RBT6 | LQFP-64_10x10mm_P0.5mm | U6 |
| 3 | ISO3088DW | SOIC-16W_7.5x10.3mm_P1.27mm | U7, U8, U9 |
| 4 | H11L1 | DIP-6_W7.62mm | U10, U11, U12, U13 |
| 1 | AO3401 | SOT-23_Handsoldering | Q1 |
| 5 | B0505S-1W | B0x0xS | Q2, Q3, Q5, Q6, Q7 |
| 1 | B0505S-2W | B0505S-2W | Q4 |
| 1 | 8MHZ 8MHz | Crystal_HC49-U_Vertical | Y1 |
| 6 | TERM_3 Term_3 | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J6, J7, J8, J12, J13, J14 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J9 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J11 |
| 6 | 0.5A | Fuse_1206_3216Metric | F1, F2, F3, F4, F5, F6 |
| 5 | Jumper_3_Open | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP4, JP5, JP6 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | SW_DIP_X01 SW_DIP_x01 | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 3 | SW_Push | SW_SPST_FSMSM | SW2, SW3, SW4 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PESD1CAN | SOT-23 | D1 |
| 4 | SMAJ15CA | D_SMA | D2, D3, D4, D5 |
| 5 | SM712_SOT23 | SOT-23 | D6, D8, D10, D11, D12 |
| 2 | 1N5817 | D_SMA-SMB_Universal_Handsoldering | D7, D9 |
| 3 | 0.47 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C8 |
| 4 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C9, C14, C15 |
| 22 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C7, C10, C11, C13, C16 +14 |
| 1 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 2 | 12 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C20 |
| 1 | 120 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R1 |
| 8 | 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 |
| 3 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R14, R16 |
| 3 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R13, R15 |
| 1 | 1K5 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
Many485 design files
The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.
Many485: common questions
What microcontroller does the Many485 use?
The Many485 is built around the STM32F303RBT6, from the STM32 family.
How big is the Many485 PCB?
The Many485 measures 80 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Many485?
107 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Many485 design files?
From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Many485 design in my own project?
The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Many485 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32samples
STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license208 STM32
Nitrogen
eddyem
80 × 80 mm136 parts4LNo license208STM32
Stm32
eddyem
98 × 63.5 mm98 parts2LNo license208STM32
Mainboard
eddyem
58 × 35 mm86 parts2LNo license208STM32
Windshield
eddyem
66 × 54 mm86 parts2LNo license208STM32
Chiller control
eddyem
62 × 60.5 mm69 parts2LNo license208STM32
Servo control
eddyem
53 × 47 mm59 parts2LNo license208STM32
Encoder
eddyem
78 × 81 mm53 parts2LNo license208STM32
Shutter
eddyem
61 × 49.5 mm40 parts2LNo license208STM32
Hall
eddyem
45.3 × 46.9 mm34 parts2LNo license208
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k