4 open source boards using the DOIT-ESP32-DEVKIT-V1

Real designs built with the DOIT-ESP32-DEVKIT-V1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The DOIT-ESP32-DEVKIT-V1 in open source designs

The gallery holds 4 open source boards using the DOIT-ESP32-DEVKIT-V1 from 4 GitHub repositories; a typical one measures about 73.3 × 83.3 mm and carries around 41 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is ControllerTHT by deltaphi.

Microcontrollers on boards using the DOIT-ESP32-DEVKIT-V1

What boards using the DOIT-ESP32-DEVKIT-V1 are built for

DOIT-ESP32-DEVKIT-V1: common questions

Where can I find a DOIT-ESP32-DEVKIT-V1 reference design?

Each of the 4 boards on this page is a real design using the DOIT-ESP32-DEVKIT-V1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the DOIT-ESP32-DEVKIT-V1 use?

Most are built on ESP32 (4).

How big is a typical board using the DOIT-ESP32-DEVKIT-V1?

The median is 73.3 × 83.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the DOIT-ESP32-DEVKIT-V1?

By GitHub stars, ControllerTHT by deltaphi, with 2 stars.

Can I simulate one of these boards using the DOIT-ESP32-DEVKIT-V1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part