Pravetz-16
enaix·pravetz-16
About the Pravetz-16 PCB
Pravetz-16 is an open source PCB design by enaix, published on GitHub. It is a board, with 31 components from 16 distinct parts.
Other key parts include the 74LS138, 74LS04, 74LS245, 74LS32 and 74LS20. By type, the board carries 23 ICs and 8 connectors.
From the project
Pravetz-16 (IMKO-4) reverse engineering project
This repository contains the schematic, notes on the differences from the original IBM PC XT architecture and various info.
Pravetz-16 (aka IMKO-4) is a Bulgarian clone of the original IBM PC XT based on the 8088 processor. Although the architecture is close to the original, the chip select and bus logic differs.
Motherboard revision text: IMKO-4 CP P3-85 KP3.088.350 KP7.102.581
Main components on the Pravetz-16
Pravetz-16 bill of materials (BOM)
31 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS138 | U1 | |
| 2 | 74LS04 | U2, U15 | |
| 1 | 74LS245 | U3 | |
| 1 | 74LS32 | U4 | |
| 1 | 74LS20 | U5 | |
| 1 | 74LS08 | U6 | |
| 1 | 74LS175 | U7 | |
| 1 | 74LS10 | U8 | |
| 1 | 74LS244 | U9 | |
| 3 | 74LS373 | U10, U11, U12 | |
| 1 | 74LS670 | U13 | |
| 1 | 74LS74 | U14 | |
| 1 | 8088 | DIP-40_W15.24mm | U16 |
| 6 | TMM2464AP | U17, U18, U19, U20, U21, U22 | |
| 1 | 8259 | DIP-28_W15.24mm | U23 |
| 8 | Bus_ISA_8bit | J1, J2, J3, J4, J5, J6, J7, J8 |
Pravetz-16 design files
The KiCad project lives in the enaix/pravetz-16 repository on GitHub; these links point at the commit this page was built from.
- Schematicpravetz-16.kicad_sch
Pravetz-16: common questions
How many components are on the Pravetz-16?
31 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pravetz-16 design files?
From the enaix/pravetz-16 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Pravetz-16 design in my own project?
The repository has no license, so all rights stay with enaix. Use it as a reference, and ask the author before reusing the design.