ArduinoController
About the ArduinoController PCB
ArduinoController is an open source AVR/Arduino PCB design by frep, published on GitHub. It is a 2-layer board measuring 150 × 80 mm, with 100 components from 46 distinct parts.
Its main chip is the ATMEGA32U4, from the AVR/Arduino family. Other key parts include the TMP36, LM358, AD5274, PCF8574 and NCP1117. By type, the board carries 29 capacitors, 23 resistors, 11 connectors, 9 ICs, 6 diodes and 4 transistors.
From the project
workspace for kicad projects
Arduino Controller ================== description is following soon...
Main components on the ArduinoController
ArduinoController bill of materials (BOM)
100 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMP36 | SOT23-5L | IC1 |
| 1 | LM358 | SOIC8 | IC2 |
| 1 | ATMEGA32U4 | TQFP44 | U1 |
| 1 | AD5274 | MSOP10 | U2 |
| 1 | PCF8574 | SO16 | U3 |
| 1 | NCP1117 | SOT23 | U4 |
| 1 | MCP1700 | SOT23 | U5 |
| 1 | ISL21070 | SOT23 | U6 |
| 1 | MCP4716 | SOT23-6 | U7 |
| 2 | MOSFET-N | SOT23 | Q1, Q2 |
| 2 | MOSFET-P | SOT23 | Q3, Q4 |
| 1 | 16MHz | HC49UP | X1 |
| 1 | USB-MICRO | USB_Micro | CON1 |
| 1 | Joystick | Joystick | J1 |
| 3 | CONN_4 | grove_con_angled | P1, P4, P5 |
| 2 | CONN_4 | Pin_Proto_Straight_1x04 | P2, P6 |
| 1 | CONN_3X2 | Pin_Proto_Straight_2x03 | P3 |
| 1 | CONN_1 | Pin_Proto_Straight_1x01 | P7 |
| 1 | CONN_2 | Pin_Proto_Straight_1x02 | P8 |
| 1 | CONN_5 | Pin_Header_Proto_1x05 | P9 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BH_2xAA | Batterieholder_2xAA | BH1, BH2 |
| 1 | BLE_Friend | bluetooth_friend | BLE1 |
| 1 | FUSE | C1812 | F1 |
| 1 | LDR | LDR | LDR1 |
| 1 | LSM9DS0 | lsm9ds0 | LSM1 |
| 8 | Neopixel | Neopixel | N1, N2, N3, N4, N5, N6, N7, N8 |
| 1 | SPDT | Switch_SPDT | S6 |
| 1 | WIFI_CC3000 | wifi_board | WIFI1 |
| 1 | DIODE | Diode-MiniMELF_Handsoldering | D1 |
| 1 | LED | LED-0805 | D2 |
| 1 | POWER | LED-0805 | D3 |
| 1 | V_BAT | LED-0805 | D4 |
| 1 | TX | LED-0805 | D5 |
| 1 | RX | LED-0805 | D6 |
| 1 | Ferrit Bead | R0805 | L1 |
| 4 | 10nF | C0805 | C1, C2, C4, C15 |
| 2 | 18pF | C0805 | C3, C5 |
| 15 | 100nF | C0805 | C6, C7, C8, C9, C10, C11, C12, C13 +7 |
| 4 | 1uF | C0805 | C18, C24, C25, C26 |
| 1 | 4.7uF | C0805 | C20 |
| 3 | 10uF | C0805 | C22, C23, C28 |
| 13 | 10K | R0805 | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
| 1 | 1M | R0805 | R9 |
| 2 | 33 | R0805 | R11, R12 |
| 2 | 1K | R0805 | R16, R17 |
| 5 | 220 | R0805 | R18, R20, R21, R22, R23 |
ArduinoController design files
The KiCad project lives in the frep/kicad repository on GitHub; these links point at the commit this page was built from.
ArduinoController: common questions
What microcontroller does the ArduinoController use?
The ArduinoController is built around the ATMEGA32U4, from the AVR/Arduino family.
How big is the ArduinoController PCB?
The ArduinoController measures 150 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ArduinoController?
100 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ArduinoController design files?
From the frep/kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ArduinoController design in my own project?
The repository has no license, so all rights stay with frep. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ArduinoController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kicad
AVR/ArduinoPowerBox
90 × 55 mm103 parts2LNo license2
AVR/ArduinoRr dev board
100 × 80 mm100 parts2LNo license2
ESP8266Frontpanel
150 × 100 mm74 parts2LNo license2
AVR/ArduinoRadioPi
85 × 56 mm54 parts2LNo license2
ESP8266EspDevBoard
69.9 × 66 mm50 parts2LNo license2
Sepic
45.7 × 33 mm50 parts2LNo license2
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746