HardLabs

ORA Arduino ESP CAN Shield Rev 1.2

gtrupiano·ECE-4998·Control_Board/ORA_Arduino_ESP_CAN_Shield/ORA_Arduino_ESP_CAN_Shield_Rev_1.2/ORA_Arduino_ESP_CAN_Shield_Rev_1.2.kicad_pcb

ORA Arduino ESP CAN Shield Rev 1.2 layout, top view — open source ESP32 board by gtrupiano

About the ORA Arduino ESP CAN Shield Rev 1.2

ORA Arduino ESP CAN Shield Rev 1.2 is an open source ESP32 PCB design by gtrupiano, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 17 components from 14 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MCP2515-xSO and MCP2551-I-SN. By type, the board carries 6 connectors, 3 ICs, 3 capacitors, 3 resistors and 1 crystal.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Senior Design implementation for Electrical Subsystems work for ORA's IGVC Robot

Main components on the ORA Arduino ESP CAN Shield Rev 1.2

ESP32-DEVKIT-V1MCP2515-xSOMCP2551-I-SN

ORA Arduino ESP CAN Shield Rev 1.2 bill of materials (BOM)

17 components, 14 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
MCP2515-xSO
U2
1
MCP2551-I-SN
U3
1
8Mhz
Y1
1
Power
J1
1
Digital/PWM
J2
1
Analog
J3
1
Digital/PWM
J4
2
CAN
J5, J6
1
120
TR1
2
22pF
C1, C2
1
100nF
C3
1
1M
R1
2
10k
R2, R3

ORA Arduino ESP CAN Shield Rev 1.2 design files

The KiCad project lives in the gtrupiano/ECE-4998 repository on GitHub; these links point at the commit this page was built from.

ORA Arduino ESP CAN Shield Rev 1.2: common questions

What microcontroller does the ORA Arduino ESP CAN Shield Rev 1.2 use?

The ORA Arduino ESP CAN Shield Rev 1.2 is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the ORA Arduino ESP CAN Shield Rev 1.2?

The ORA Arduino ESP CAN Shield Rev 1.2 measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ORA Arduino ESP CAN Shield Rev 1.2?

17 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the ORA Arduino ESP CAN Shield Rev 1.2 design files?

From the gtrupiano/ECE-4998 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ORA Arduino ESP CAN Shield Rev 1.2 design in my own project?

The repository has no license, so all rights stay with gtrupiano. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ORA Arduino ESP CAN Shield Rev 1.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ECE-4998

Similar boards