9 open source boards using the HUSB238_002DD
Real designs built with the HUSB238_002DD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad usb pd power manager
flisboac
26.2 × 76.2 mm141 parts4LCERN-OHL-P-2.03STM32
KigEyes
jrymk
100 × 60 mm256 parts4LCERN-OHL-S-2.00Charging circuit
vacuumsens
82.6 × 94.6 mm232 parts2LNo license0ESP32
Pet climate control
Yuan-Quan
217.2 × 95.3 mm218 parts2LNo license0ESP32
E002 rocker
oscar-wik
56.5 × 216 mm213 parts4LNo license0Senseeker final
vacuumsens
82.6 × 94.6 mm232 parts2LNo license0ESP32
Pd test
Yuan-Quan
107.2 × 83.8 mm67 parts4LNo license0Power pd trigger
HeyPCB
28 × 40 mm17 parts2LCERN-OHL-S-2.00Power eta6003-5v ups
smkent
40 × 40 mm66 parts2LCC-BY-SA-4.00
How designs wire the HUSB238_002DD
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the HUSB238_002DD connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 5 of 7 designs, most often 1 µF (then 100 nF).
- The GATE pin has a series resistor on 5 of 7 designs, most often 10 kΩ (then 1.5 kΩ).
- The VIN pin has a series resistor on 4 of 7 designs, most often 10 Ω (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 3 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: Signal 71% · VBUS 29% |
|
| SDApin 6 | Connected to: A connector 29% · not connected 29% |
|
| SCLpin 7 | Connected to: A connector 29% · not connected 29% |
|
| ISETpin 9 | Connected to: Signal 71% |
|
| GATEpin 10 | Connected to: Signal 71% |
|
| GNDpin 11 | Connected to: GND 86% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad usb pd power manager by flisboac, Power pd trigger by HeyPCB, KigEyes by jrymk and E002 rocker by oscar-wik.
The HUSB238_002DD in open source designs
The gallery holds 9 open source boards using the HUSB238_002DD from 7 GitHub repositories; a typical one measures about 82.6 × 83.8 mm and carries around 213 components.
56% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Kicad usb pd power manager by flisboac.
Parts used alongside the HUSB238_002DD
What boards using the HUSB238_002DD are built for
HUSB238_002DD: common questions
Where can I find a HUSB238_002DD reference design?
Each of the 9 boards on this page is a real design using the HUSB238_002DD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the HUSB238_002DD VIN pin connected?
The VIN pin has a capacitor to GND on 5 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the HUSB238_002DD.
What resistor goes on the HUSB238_002DD GATE pin?
The GATE pin has a series resistor on 5 of 7 designs, most often 10 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 7 open source designs using the HUSB238_002DD.
What pull-up resistor is used on the HUSB238_002DD SDA pin?
The SDA pin has a pull-up to 3.3V on 3 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the HUSB238_002DD.
Which microcontrollers do boards using the HUSB238_002DD use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the HUSB238_002DD?
The median is 82.6 × 83.8 mm, and 56% are two-layer designs.
What is the most popular open source board using the HUSB238_002DD?
By GitHub stars, Kicad usb pd power manager by flisboac, with 3 stars.
Can I simulate one of these boards using the HUSB238_002DD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.