2-usb c
hoellwerth·Expansioncards·2-usb-c/Electrical/2-usb-c.kicad_pcb
About the 2-usb c PCB
2-usb c is an open source ESP32 PCB design by hoellwerth, published on GitHub under the MIT license. It is a 2-layer board measuring 26 × 30 mm, with 14 components from 13 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3 and SN65HVD230. By type, the board carries 4 capacitors, 4 resistors, 3 ICs and 3 connectors.
From the project
A collection of expansioncards for the Framework Laptop
A collection of my Expansion Cards for the Framework Laptop
Since I've first seen the Framework Laptop, designing my own Hardware has always fascinated me. I'm working on different Cards ranging from a PD-trigger board over a CAN interface to a TTL converter or even a dock
- CAN A CAN Interface - 2 USB-C A USB-C Hub card - Power output A USB-C PD Trigger card - SD-Card A full-size SD-Card - Uart A uart interface card
Main components on the 2-usb c
2-usb c bill of materials (BOM)
14 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | AP2112K-3.3 TUSB8041 | QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm_ThermalVias | U2 |
| 1 | SN65HVD230 AP2112K-1.2 | SOT-23-5 | U3 |
| 1 | CONN_01X05 USB_C_Receptacle | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C4 |
| 1 | 1UF 10uF | C_0805_2012Metric | C2 |
| 1 | 0.1UF 10uF | C_0805_2012Metric | C3 |
| 1 | 10K 5.1k | R_0603_1608Metric | R1 |
| 1 | 5.1K 90.9K | R_0201_0603Metric | R2 |
| 1 | 5.1K 10K | R_0201_0603Metric | R3 |
| 1 | 5.1K 9.53K | R_0201_0603Metric | R4 |
2-usb c design files
The KiCad project lives in the hoellwerth/Expansioncards repository on GitHub; these links point at the commit this page was built from.
2-usb c: common questions
What microcontroller does the 2-usb c use?
The 2-usb c is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the 2-usb c PCB?
The 2-usb c measures 26 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2-usb c?
14 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2-usb c design files?
From the hoellwerth/Expansioncards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2-usb c design in my own project?
Yes, under the terms of its MIT license, which hoellwerth chose for the repository.
Can I test firmware for the 2-usb c without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Expansioncards
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k