Microcontroller Expansion Card

hoellwerth·Expansioncards·Template/Electrical/Microcontroller/Microcontroller.kicad_pcb

Microcontroller Expansion Card PCB layout, top view — open source ESP32 board by hoellwerth

About the Microcontroller Expansion Card PCB

Microcontroller Expansion Card is an open source ESP32 PCB design by hoellwerth, published on GitHub under the MIT license. It is a 2-layer board measuring 26 × 30 mm, with 24 components from 21 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3, SN65HVD230 and FODM217D. By type, the board carries 8 capacitors, 6 resistors, 4 ICs, 3 connectors, 2 diodes and 1 switch.

From the project

A collection of expansioncards for the Framework Laptop

Expansion Cards © 2021 by Framework Computer Inc is licensed under CC BY 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

- KiCadtemplates - These are templates with the PCB outline and some basic components to let you get started with a card design quickly. The ExpansionCard template is designed to be used with the 3D printable enclosures in the Mechanical folder. The ExpansionCardRetrofit template is smaller and designed to fit into the existing Expansion Card enclosures like the DP Expansion Card's. You can copy the folders to the default template…

Microcontroller Expansion Card, from the project README
From the project README

Main components on the Microcontroller Expansion Card

Microcontroller Expansion Card bill of materials (BOM)

24 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-MINI-1
ATSAMD21E18A-M
U1
1
AP2112K-3.3
GD25Q16CT
U2
1
SN65HVD230
AP2112K-3.3
U3
1
FODM217D
TLV70036_SOT23-5
U4
1
CONN_01X05
JST SH 1x4
J1
1
Conn_01x10
J2
1
USB_C_PLUG_USB2.0
USB_C_Plug_USB2.0
P1
1
RESET
SW1
1
BAT20JFILM
D1
1
WS2812B
D2
1
10UF
1uF
C1
1
1UF
100nF
C2
1
0.1UF
100nF
C3
1
10UF
100nF
C4
1
10UF
10uF
C5
1
0.1UF
10uF
C6
2
1uF
C7, C8
2
10K
5.1k
R1, R5
1
5.1K
1k
R2
2
5.1K
5.1k
R3, R4
Show 1 more
QtyPartRefs
1
120R
5.1k
R6

Microcontroller Expansion Card design files

The KiCad project lives in the hoellwerth/Expansioncards repository on GitHub; these links point at the commit this page was built from.

Microcontroller Expansion Card: common questions

What microcontroller does the Microcontroller Expansion Card use?

The Microcontroller Expansion Card is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the Microcontroller Expansion Card PCB?

The Microcontroller Expansion Card measures 26 × 30 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the Microcontroller Expansion Card?

24 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Microcontroller Expansion Card design files?

From the hoellwerth/Expansioncards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Microcontroller Expansion Card design in my own project?

Yes, under the terms of its MIT license, which hoellwerth chose for the repository.

Can I test firmware for the Microcontroller Expansion Card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Expansioncards

Similar boards