Expansion Card Retrofit
hoellwerth·Expansioncards·Template/Electrical/KiCad_templates/Expansion_Card_Retrofit/Expansion_Card_Retrofit.kicad_pcb
About the Expansion Card Retrofit PCB
Expansion Card Retrofit is an open source ESP32 PCB design by hoellwerth, published on GitHub under the MIT license. It is a 2-layer board measuring 24 × 27.3 mm, with 5 components from 5 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. By type, the board carries 2 capacitors, 1 IC, 1 connector and 1 resistor.
It belongs with the retro computing designs in this gallery.
From the project
A collection of expansioncards for the Framework Laptop
Expansion Cards © 2021 by Framework Computer Inc is licensed under CC BY 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
- KiCadtemplates - These are templates with the PCB outline and some basic components to let you get started with a card design quickly. The ExpansionCard template is designed to be used with the 3D printable enclosures in the Mechanical folder. The ExpansionCardRetrofit template is smaller and designed to fit into the existing Expansion Card enclosures like the DP Expansion Card's. You can copy the folders to the default template…

Main components on the Expansion Card Retrofit
Expansion Card Retrofit bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 1 | 1UF 10uF | C_0805_2012Metric | C2 |
| 1 | 10K 5.1k | R_0603_1608Metric | R1 |
Expansion Card Retrofit design files
The KiCad project lives in the hoellwerth/Expansioncards repository on GitHub; these links point at the commit this page was built from.
Expansion Card Retrofit: common questions
What microcontroller does the Expansion Card Retrofit use?
The Expansion Card Retrofit is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Expansion Card Retrofit PCB?
The Expansion Card Retrofit measures 24 × 27.3 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Expansion Card Retrofit?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Expansion Card Retrofit design files?
From the hoellwerth/Expansioncards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Expansion Card Retrofit design in my own project?
Yes, under the terms of its MIT license, which hoellwerth chose for the repository.
Can I test firmware for the Expansion Card Retrofit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Expansioncards
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k