Power output
hoellwerth·Expansioncards·power-output/Electrical/power-output.kicad_pcb
About the Power output PCB
Power output is an open source ESP32 PCB design by hoellwerth, published on GitHub under the MIT license. It is a 2-layer board measuring 26 × 30 mm, with 21 components from 18 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3, SN65HVD230, FODM217D and CP2102N-Axx-xQFN28. By type, the board carries 10 capacitors, 5 ICs, 4 resistors and 2 connectors.
From the project
A collection of expansioncards for the Framework Laptop
The KiCad project with schematics and PCBs
Main components on the Power output
Power output bill of materials (BOM)
21 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | AP2112K-3.3 FUSB302BMPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U2 |
| 1 | SN65HVD230 LM78L05_SO8 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | FODM217D ESP8266EX | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U4 |
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | CONN_01X05 Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Horizontal | J1 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 1 | 10UF 1uF | C_0201_0603Metric | C1 |
| 1 | 1UF 1uF | C_0201_0603Metric | C2 |
| 1 | 0.1UF 1uF | C_0201_0603Metric | C3 |
| 1 | 10UF 0.1uF | C_0201_0603Metric | C4 |
| 1 | 10UF 470pF | C_0201_0603Metric | C5 |
| 1 | 0.1UF 470pF | C_0201_0603Metric | C6 |
| 1 | 1uF | C_0201_0603Metric | C7 |
| 2 | 0.1uF | C_0201_0603Metric | C8, C10 |
| 1 | 0.33uF | C_0201_0603Metric | C9 |
| 1 | 10K 5.1k | R_0201_0603Metric | R1 |
| 3 | 5.1K 4.7k | R_0201_0603Metric | R2, R3, R4 |
Power output design files
The KiCad project lives in the hoellwerth/Expansioncards repository on GitHub; these links point at the commit this page was built from.
Power output: common questions
What microcontroller does the Power output use?
The Power output is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Power output PCB?
The Power output measures 26 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power output?
21 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power output design files?
From the hoellwerth/Expansioncards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power output design in my own project?
Yes, under the terms of its MIT license, which hoellwerth chose for the repository.
Can I test firmware for the Power output without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Expansioncards
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k