CAN-Expansioncard
hoellwerth·Expansioncards·CAN/Electrical/CAN.kicad_pcb
About the CAN-Expansioncard PCB
CAN-Expansioncard is an open source ESP32 PCB design by hoellwerth, published on GitHub under the MIT license. It is a 4-layer board measuring 26 × 30 mm, with 38 components from 32 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3, SN65HVD230 and FODM217D. By type, the board carries 16 capacitors, 10 resistors, 4 ICs, 3 diodes, 2 connectors and 1 crystal.
From the project
A collection of expansioncards for the Framework Laptop
Main components on the CAN-Expansioncard
CAN-Expansioncard bill of materials (BOM)
38 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | AP2112K-3.3 ESP32-C3 | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | FODM217D | SOP-4_4.4x2.6mm_P1.27mm | U4 |
| 1 | 40MHz | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_01X05 Conn_01x04 | PinSocket_1x04_P2.54mm_Horizontal | J1 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 1 | Reset | SW_SPST_B3U-3000P | SW1 |
| 1 | ESD | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | D_Schottky | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 2nH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 0.1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10UF TBD | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0.1UF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C13 |
| 1 | TBD | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C14, C15, C16 |
| 1 | 10K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 5.1K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 5.1K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5.1K 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 120R 499R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 20R 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 120R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 20R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
CAN-Expansioncard design files
The KiCad project lives in the hoellwerth/Expansioncards repository on GitHub; these links point at the commit this page was built from.
CAN-Expansioncard: common questions
What microcontroller does the CAN-Expansioncard use?
The CAN-Expansioncard is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the CAN-Expansioncard PCB?
The CAN-Expansioncard measures 26 × 30 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the CAN-Expansioncard?
38 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CAN-Expansioncard design files?
From the hoellwerth/Expansioncards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CAN-Expansioncard design in my own project?
Yes, under the terms of its MIT license, which hoellwerth chose for the repository.
Can I test firmware for the CAN-Expansioncard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Expansioncards
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k