ESP32-Walkie-Talkie-V2
houseofthe051010·ESP32-Walkie-Talkie-V2·Schematics/KiCad Project/walkiepcb.kicad_pcb
About the ESP32-Walkie-Talkie-V2 PCB
ESP32-Walkie-Talkie-V2 is an open source ESP32 PCB design by houseofthe051010, published on GitHub. It is a 2-layer board measuring 45 × 100 mm, with 87 components from 48 distinct parts.
Its main chip is the ESP32-WROOM-32D-N16, from the ESP32 family. Other key parts include the USBLC6-2SC6, CH340C, TP4056-42-ESOP8, DW01A and TPS63021DSJR. By type, the board carries 25 resistors, 23 capacitors, 8 ICs, 6 transistors, 6 connectors and 6 test points.
It belongs with the rf & radio, iot & wireless and audio designs in this gallery.
From the project
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
This project is submitted to review at forge; And also, I have made a similar ESP32 based walkie talkie in the past. This is an iteration and is significantly different from the old version. It uses a custom PCB, new and different components, communication protocols, radios, and CAD/casing. It is a much needed iteration from my old version which was very difficult to hard wire and prone to several mistakes.

Main components on the ESP32-Walkie-Talkie-V2
ESP32-Walkie-Talkie-V2 bill of materials (BOM)
87 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U1 |
| 1 | CH340C WCH | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | TP4056-42-ESOP8 Top Power ASIC | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U3 |
| 1 | DW01A PUOLOP | SOT-23-6 | U4 |
| 1 | TPS63021DSJR Texas Instruments | DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U5 |
| 1 | ESP32-WROOM-32D-N16 Espressif Systems | ESP32-WROOM-32 | U6 |
| 1 | MAX98357AETE+T Analog Devices / Maxim | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U7 |
| 1 | Ra-01SH Ra-01SH / SX1262 915MHz Ai-Thinker | Ai-Thinker_Ra-01SH | U8 |
| 3 | MMBT3904 CJ (Changjiang Electronics Tech) | SOT-23 | Q1, Q2, Q6 |
| 1 | FS8205A FS8205A dual NMOS FUXINSEMI | SOT-23-6 | Q3 |
| 2 | AO3401A Alpha & Omega Semiconductor | SOT-23 | Q4, Q5 |
| 1 | TYPE-C-31-M-12 USB-C / charge + program Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 2 solder pads BAT+ / BAT- Hand-wired | WirePads_2_P5.08mm | J2 |
| 1 | 2 solder pads SPK+ / SPK- Hand-wired | WirePads_2_P5.08mm | J4 |
| 1 | 3 solder pads 3V3 / POT_ADC / GND Hand-wired | WirePads_3_P2.54mm | J5 |
| 1 | 2 solder pads LED+ / LED- Hand-wired | WirePads_2_P2.54mm | J6 |
| 1 | 2.54mm 1x4 header OLED MODULE: GND / 3V3 / SCL / SDA Hand-wired | OLED_1x04_P2.54mm_HolesOnly | J7 |
| 1 | 1206L200PR 1206L200PR 2A hold / 3.5A trip Littelfuse | Fuse_1206_3216Metric | F1 |
| 1 | ICS-43432 ICS-43432 (bottom-port I2S) TDK InvenSense | ICS-43432_LGA7_4x3mm | MK1 |
| 1 | TL1100F100QG BTN1 / hand-solder E-Switch or equivalent | SW_Tactile_2Pin_6x6mm_P5.0mm | SW1 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL1100F100QG BTN2 / hand-solder E-Switch or equivalent | SW_Tactile_2Pin_6x6mm_P5.0mm | SW2 |
| 1 | TL1100F100QG BTN3 / hand-solder E-Switch or equivalent | SW_Tactile_2Pin_6x6mm_P5.0mm | SW3 |
| 1 | TL1100F100QG BTN4 / hand-solder E-Switch or equivalent | SW_Tactile_2Pin_6x6mm_P5.0mm | SW4 |
| 1 | TL1100F100QG BTN5 POWER / FUNCTION E-Switch or equivalent | SW_Tactile_2Pin_6x6mm_P5.0mm | SW5 |
| 1 | SMD test pad 3V3 PCB pad | TestPad_1.0mm | TP1 |
| 1 | SMD test pad GND PCB pad | TestPad_1.0mm | TP2 |
| 1 | SMD test pad TX0 PCB pad | TestPad_1.0mm | TP3 |
| 1 | SMD test pad RX0 PCB pad | TestPad_1.0mm | TP4 |
| 1 | SMD test pad EN PCB pad | TestPad_1.0mm | TP5 |
| 1 | SMD test pad GPIO0 PCB pad | TestPad_1.0mm | TP6 |
| 1 | SS34 MDD | D_SMA | D1 |
| 2 | KT-0603R Hubei KENTO | LED_0603_1608Metric | D2, D3 |
| 2 | 1N4148WS Jiangsu Changjing Electronics Technology | D_SOD-323 | D5, D6 |
| 1 | MWTC201610S2R2MT 2.2uH / 4.2A Isat Sunlord | L_Murata_DFE201610P | L1 |
| 10 | CC0603KRX7R9BB104 100n YAGEO | C_0603_1608Metric | C1, C7, C9, C12, C14, C15, C16, C26 +2 |
| 2 | CL10A105KB8NNNC 1u Samsung Electro-Mechanics | C_0603_1608Metric | C4, C17 |
| 6 | CL21A106KAYNNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric | C5, C6, C8, C13, C18, C20 |
| 5 | CL21A226MAQNNNE 22u Samsung Electro-Mechanics | C_0805_2012Metric | C10, C11, C19, C27, C28 |
| 2 | 0603WAF5101T5E 5.1k UNI-ROYAL | R_0603_1608Metric | R1, R2 |
| 2 | 0603WAF220JT5E 22 UNI-ROYAL | R_0603_1608Metric | R3, R4 |
| 4 | 0603WAF1002T5E 10k UNI-ROYAL | R_0603_1608Metric | R5, R6, R22, R23 |
| 2 | 0603WAF2401T5E 2.4k UNI-ROYAL | R_0603_1608Metric | R7, R20 |
| 1 | 0603WAF1000T5E 100 UNI-ROYAL | R_0603_1608Metric | R8 |
| 1 | 0603WAF1001T5E 1k UNI-ROYAL | R_0603_1608Metric | R9 |
| 4 | 0603WAF1003T5E 100k UNI-ROYAL | R_0603_1608Metric | R10, R13, R14, R19 |
| 2 | 0603WAF4701T5E 4.7k UNI-ROYAL | R_0603_1608Metric | R15, R16 |
| 3 | 0603WAF3300T5E 330 UNI-ROYAL | R_0603_1608Metric | R21, R24, R25 |
| 4 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R26, R27, R28, R30 |
ESP32-Walkie-Talkie-V2 design files
The KiCad project lives in the houseofthe051010/ESP32-Walkie-Talkie-V2 repository on GitHub; these links point at the commit this page was built from.
ESP32-Walkie-Talkie-V2: common questions
What microcontroller does the ESP32-Walkie-Talkie-V2 use?
The ESP32-Walkie-Talkie-V2 is built around the ESP32-WROOM-32D-N16, from the ESP32 family.
How big is the ESP32-Walkie-Talkie-V2 PCB?
The ESP32-Walkie-Talkie-V2 measures 45 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Walkie-Talkie-V2?
87 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Walkie-Talkie-V2 design files?
From the houseofthe051010/ESP32-Walkie-Talkie-V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Walkie-Talkie-V2 design in my own project?
The repository has no license, so all rights stay with houseofthe051010. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Walkie-Talkie-V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k