3 open source boards using the Ra-01SH

Real designs built with the Ra-01SH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The Ra-01SH in open source designs

The gallery holds 3 open source boards using the Ra-01SH from 3 GitHub repositories; a typical one measures about 50 × 45.9 mm and carries around 58 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is ESP32-Walkie-Talkie-V2 by houseofthe051010.

Parts used alongside the Ra-01SH

Microcontrollers on boards using the Ra-01SH

What boards using the Ra-01SH are built for

Ra-01SH: common questions

Where can I find a Ra-01SH reference design?

Each of the 3 boards on this page is a real design using the Ra-01SH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Ra-01SH use?

Most are built on ESP32 (1).

How big is a typical board using the Ra-01SH?

The median is 50 × 45.9 mm, and 33% are two-layer designs.

What is the most popular open source board using the Ra-01SH?

By GitHub stars, ESP32-Walkie-Talkie-V2 by houseofthe051010, with 1 stars.

Can I simulate one of these boards using the Ra-01SH before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part