6 open source boards using the TPS63021DSJR

Real designs built with the TPS63021DSJR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPS63021DSJR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS63021DSJR connects to, and the resistors, capacitors and other passives placed on it.

  • The L2_6 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH).
  • The L2_7 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH).
  • The L1_8 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH).
  • The L1_9 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH).
VINA_1pin 1Connected to: Signal 83% · VSYS 17%
  • Capacitor to GND on 83% · 100 nF (5), 10 µF (4), 1 µF (1)
GND_2pin 2Connected to: GND 83% · a signal 17%
FB_3pin 3Connected to: 3.3V 67% · a signal 33%
VOUT_4pin 4Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 50% · 22 µF (6)
VOUT_5pin 5Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 50% · 22 µF (6)
L2_6pin 6Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (2), 1 µH (2), 2.2 µH (1)
L2_7pin 7Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (2), 1 µH (2), 2.2 µH (1)
L1_8pin 8Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (2), 1 µH (2), 2.2 µH (1)
L1_9pin 9Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (2), 1 µH (2), 2.2 µH (1)
VIN_10pin 10Connected to: BATT 50% · a signal 50%
  • Capacitor to GND on 50% · 10 µF (5), 100 nF (3), 1 µF (1)
VIN_11pin 11Connected to: BATT 50% · a signal 50%
  • Capacitor to GND on 50% · 10 µF (5), 100 nF (3), 1 µF (1)
EN_12pin 12Connected to: Signal 83% · VSYS 17%
  • Capacitor to GND on 50% · 10 µF (5), 100 nF (4), 1 µF (1)
PS/SYNC_13pin 13Connected to: GND 67% · a signal 33%
PG_14pin 14Connected to: Not connected 67% · 3.3V 17% · a signal 17%
PGND_15pin 15Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-Walkie-Talkie-V2 by houseofthe051010, Unique-DAP by Oru-star, Flip phone by denglermoss and AgriPV-Messstation by DerSchweigefuchs.

The TPS63021DSJR in open source designs

The gallery holds 6 open source boards using the TPS63021DSJR from 6 GitHub repositories; a typical one measures about 55 × 106.5 mm and carries around 112 components.

50% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Unique-DAP by Oru-star.

Parts used alongside the TPS63021DSJR

Microcontrollers on boards using the TPS63021DSJR

TPS63021DSJR: common questions

Where can I find a TPS63021DSJR reference design?

Each of the 6 boards on this page is a real design using the TPS63021DSJR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS63021DSJR L2_6 pin connected?

The L2_6 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH). Counted from the KiCad layouts of 6 open source designs using the TPS63021DSJR.

How is the TPS63021DSJR L2_7 pin connected?

The L2_7 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH). Counted from the KiCad layouts of 6 open source designs using the TPS63021DSJR.

How is the TPS63021DSJR L1_8 pin connected?

The L1_8 pin has a inductor on 6 of 6 designs, most often 1.5 µH (then 1 µH). Counted from the KiCad layouts of 6 open source designs using the TPS63021DSJR.

Which microcontrollers do boards using the TPS63021DSJR use?

Most are built on ESP32 (5) and STM32 (1).

How big is a typical board using the TPS63021DSJR?

The median is 55 × 106.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPS63021DSJR?

By GitHub stars, Unique-DAP by Oru-star, with 1 stars.

Can I simulate one of these boards using the TPS63021DSJR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part