Wisp
huulanka·wisp·hardware/kicad/wisp.kicad_pcb
About the Wisp PCB
Wisp is an open source ESP32 PCB design by huulanka, published on GitHub under the MIT license. It is a 4-layer board measuring 60 × 80 mm, with 74 components from 42 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the AP63203WU-7, SCD41-D-R2, SGP41-D-R4, BH1750FVI-TR and BME280. By type, the board carries 19 resistors, 17 capacitors, 15 diodes, 9 connectors, 7 ICs and 2 transistors.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
KiCad project for the Wisp board. See /hardware/kicad for schematic/PCB source, /hardware/scripts for the generators that produce them, and /hardware/fab for exported Gerbers/drill/BOM/CPL.
Board: 60 x 80 mm, 4 layers, single-sided assembly (all parts on F.Cu).
This is the most important thing to know before touching anything here.
Edit the data, re-run the generators. Do not hand-edit wisp.kicadsch — it is overwritten. Rev A's schematic was produced by a throwaway script that was never committed, which is why by Rev B nobody could reconstruct how it had been built. That is the problem…
Main components on the Wisp
Wisp bill of materials (BOM)
74 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63203WU-7 Diodes Incorporated | TSOT-23-6 | U2 |
| 1 | ESP32-S3-WROOM-1-N8 Espressif | ESP32-S3-WROOM-1 | U3 |
| 1 | SCD41-D-R2 Sensirion | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U4 |
| 1 | SGP41-D-R4 SGP41 Sensirion | Sensirion_DFN-6-1EP_2.44x2.44mm_P0.8mm_EP1.25x1.7mm | U5 |
| 1 | BH1750FVI-TR ROHM | BH1750FVI-TR_WSOF6 | U6 |
| 1 | BME280 Bosch Sensortec | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U7 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U8 |
| 1 | AO3400A Alpha & Omega | SOT-23 | Q3 |
| 1 | MMBT3904 onsemi | SOT-23 | Q4 |
| 1 | TYPE-C-31-M-12 USB-C HRO | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Second I2C Bus | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | mmWave UART (LD2410) | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | I2S Mic (INMP441) | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Switched DC Output | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Reed/Hall Contact | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | 1-Wire Bus | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Analog Sensor Pad | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Expansion Header | PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | CPT-9019S-SMT Buzzer CUI Devices | Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | MF-MSMF050-2 500mA Bourns | Fuse_1812_4532Metric | F1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PTS810 SJM 250 SMTR LFS RESET C&K | SW_SPST_PTS810 | SW1 |
| 1 | PTS810 SJM 250 SMTR LFS BOOT C&K | SW_SPST_PTS810 | SW2 |
| 1 | WS2812B-B/T WS2812B Worldsemi | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 11 | PESD5V0L1UL Nexperia | D_SOD-882 | D2, D3, D5, D6, D7, D8, D9, D10 +3 |
| 1 | SS14 MDD (Microdiode Semiconductor) | D_SMA | D4 |
| 1 | 1N4148W-7-F 1N4148W Diodes Incorporated | D_SOD-123 | D11 |
| 1 | KT-0805G GREEN Hubei KENTO Elec | LED_0805_2012Metric | D12 |
| 1 | SRN3015-2R2M 2.2uH Bourns | L_1210_3225Metric | L1 |
| 8 | CL21B104KBCNNNC 100nF Samsung | C_0805_2012Metric | C2, C7, C9, C10, C16, C17, C18, C19 |
| 4 | CL21A106KOQNNNE 10uF Samsung | C_0805_2012Metric | C3, C5, C12, C13 |
| 3 | CL21B105KBFNNNE 1uF Samsung | C_0805_2012Metric | C4, C20, C21 |
| 2 | CL21A226MOQNNNE 22uF Samsung | C_0805_2012Metric | C6, C14 |
| 2 | RC0805FR-075K1L 5.1k Yageo | R_0805_2012Metric | R1, R2 |
| 3 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R3, R4, R20 |
| 1 | RC0805FR-07330RL 330R Yageo | R_0805_2012Metric | R7 |
| 5 | RC0805FR-074K7L 4.7k Yageo | R_0805_2012Metric | R8, R9, R10, R11, R14 |
| 1 | RC0805FR-07100RL 100R Yageo | R_0805_2012Metric | R12 |
| 1 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R13 |
| 3 | RC0805FR-07220RL 220R Yageo | R_0805_2012Metric | R15, R16, R17 |
| 1 | RC0805FR-07100KL 100k Yageo | R_0805_2012Metric | R18 |
| 1 | RC0805FR-072K2L 2.2k Yageo | R_0805_2012Metric | R21 |
| 1 | RC0805FR-074R7L 4.7R Yageo | R_0805_2012Metric | R22 |
Wisp design files
The KiCad project lives in the huulanka/wisp repository on GitHub; these links point at the commit this page was built from.
Wisp: common questions
What microcontroller does the Wisp use?
The Wisp is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How big is the Wisp PCB?
The Wisp measures 60 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Wisp?
74 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wisp design files?
From the huulanka/wisp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wisp design in my own project?
Yes, under the terms of its MIT license, which huulanka chose for the repository.
Can I test firmware for the Wisp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k