MCU
HydrogreenPollub·legacy-pcb-motor-driver-unit
About the MCU PCB
MCU is an open source ESP32 PCB design by HydrogreenPollub, published on GitHub under the MIT license. It is a 2-layer board measuring 100.1 × 70.1 mm, with 101 components from 53 distinct parts.
Its main chip is the ESP32-S3FN8, from the ESP32 family. Other key parts include the LM76202QPWPRQ1, TPS62933, USBLC6-2P6, SN65HVD232 and PC817. By type, the board carries 38 resistors, 25 capacitors, 11 test points, 7 ICs, 6 connectors and 6 diodes.
It belongs with the robotics & motion and sensors designs in this gallery.
Main components on the MCU
MCU bill of materials (BOM)
101 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM76202QPWPRQ1 | SOP65P640X120-17N | IC1 |
| 1 | TPS62933 | SOT-583-8 | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | ESP32-S3FN8 | QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U4 |
| 1 | SN65HVD232 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | PC817 | DIP-4_W7.62mm | U6, U7 |
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 1 | Crystal_GND24 | KC3225K400000C1GE00 | Y1 |
| 2 | Conn_01x02 | 39-30-102Y | J1, J4 |
| 1 | Conn_01x03 | 39-30-104Y | J2 |
| 1 | Conn_01x03_Pin | 39303035 | J3 |
| 1 | Conn_01x04 | 39-30-104Y | J6 |
| 1 | USB_C_Plug_USB2.0 | 2169900002 | P1 |
| 3 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | +12V | PinHeader_1x01_P2.00mm_Vertical | TP1, TP2 |
| 2 | +5V | PinHeader_1x01_P2.00mm_Vertical | TP3, TP4 |
| 2 | +3,3V | PinHeader_1x01_P2.00mm_Vertical | TP5, TP6 |
| 2 | GND | PinHeader_1x01_P2.00mm_Vertical | TP7, TP8 |
| 1 | I/O_1 | PinHeader_1x01_P2.00mm_Vertical | TP9 |
| 1 | I/O_2 | PinHeader_1x01_P2.00mm_Vertical | TP10 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | I/O_3 | PinHeader_1x01_P2.00mm_Vertical | TP11 |
| 1 | BAS40-05 | TO252__DPAK__1 | D2 |
| 1 | SP0502BAJT | SOT-323_SC-70 | D3 |
| 3 | LED | LED_1206_3216Metric | D4, D5, D6 |
| 1 | TPSMC30CA | DIONM5436X244N | D7 |
| 1 | 4u7 | SRN3015TA4R7M | L1 |
| 1 | 2n | LQG15WH0N7B02D | L2 |
| 2 | 10u | EEHZT1E331UP | C2, C15 |
| 8 | 100n | C_1206_3216Metric | C3, C4, C10, C11, C17, C18, C21, C24 |
| 1 | 47p | C_1206_3216Metric | C6 |
| 1 | 100u | EEHZT1E331UP | C7 |
| 1 | 33n | C_1206_3216Metric | C8 |
| 6 | 1u | C_1206_3216Metric | C12, C13, C14, C16, C19, C26 |
| 1 | 10n | C_1206_3216Metric | C20 |
| 2 | 12p | C_1206_3216Metric | C22, C23 |
| 1 | 4n7 | C_1206_3216Metric | C25 |
| 1 | 47u | CP_Elec_6.3x7.7 | C27 |
| 1 | 2n7 | C_1206_3216Metric | C28 |
| 3 | 100 | R_1206_3216Metric | R1, R16, R18 |
| 4 | 0 | R_1206_3216Metric | R2, R3, R31, R32 |
| 2 | 5k1 | R_1206_3216Metric | R4, R5 |
| 5 | R | R_1206_3216Metric | R6, R7, R9, R11, R35 |
| 1 | 32k | R_1206_3216Metric | R8 |
| 6 | 10k | R_1206_3216Metric | R10, R13, R14, R15, R37, R38 |
| 2 | 1k0 | R_1206_3216Metric | R12, R30 |
| 5 | 1k | R_1206_3216Metric | R17, R19, R22, R23, R24 |
| 2 | 60 | R_1206_3216Metric | R20, R21 |
| 1 | 180k | R_1206_3216Metric | R25 |
| 1 | 12k | R_1206_3216Metric | R26 |
| 2 | 100k | R_1206_3216Metric | R27, R28 |
| 1 | 56k | R_1206_3216Metric | R29 |
| 2 | 1 | R_1206_3216Metric | R33, R34 |
| 1 | 30k | R_1206_3216Metric | R36 |
MCU design files
The KiCad project lives in the HydrogreenPollub/legacy-pcb-motor-driver-unit repository on GitHub; these links point at the commit this page was built from.
- LayoutMCU.kicad_pcb
MCU: common questions
What microcontroller does the MCU use?
The MCU is built around the ESP32-S3FN8, from the ESP32 family.
How big is the MCU PCB?
The MCU measures 100.1 × 70.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCU?
101 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the MCU design files?
From the HydrogreenPollub/legacy-pcb-motor-driver-unit repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MCU design in my own project?
Yes, under the terms of its MIT license, which HydrogreenPollub chose for the repository.
Can I test firmware for the MCU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in legacy-pcb-motor-driver-unit
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k