Schematic main
HydrogreenPollub·legacy-pcb-motor-driver-unit
About the Schematic main PCB
Schematic main is an open source ESP32 PCB design by HydrogreenPollub, published on GitHub under the MIT license. It is a board, with 110 components from 56 distinct parts.
Its main chip is the ESP32-S3FN8, from the ESP32 family. Other key parts include the LM76202QPWPRQ1, TPS62933, USBLC6-2P6, SN65HVD232 and PC817. By type, the board carries 38 resistors, 26 capacitors, 12 test points, 9 ICs, 7 diodes and 6 connectors.
It belongs with the robotics & motion and sensors designs in this gallery.
Main components on the Schematic main
Schematic main bill of materials (BOM)
110 components, 56 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM76202QPWPRQ1 | SOP65P640X120-17N | IC1, IC2 |
| 2 | TPS62933 | SOT-583-8 | U2, U9 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | ESP32-S3FN8 | QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U4 |
| 1 | SN65HVD232 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | PC817 | DIP-4_W7.62mm | U6, U7 |
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 1 | Crystal_GND24 | KC3225K400000C1GE00 | Y1 |
| 2 | Conn_01x02 | 39-30-102Y | J1, J4 |
| 1 | Conn_01x03 | 39-30-104Y | J2 |
| 1 | Conn_01x03_Pin | 39303035 | J3 |
| 1 | Conn_01x04 | 39-30-104Y | J6 |
| 1 | USB_C_Plug_USB2.0 | 2169900002 | P1 |
| 4 | MountingHole | MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | +12V | PinHeader_1x01_P2.00mm_Vertical | TP1, TP2 |
| 2 | +5V | PinHeader_1x01_P2.00mm_Vertical | TP3, TP4 |
| 2 | +3,3V | PinHeader_1x01_P2.00mm_Vertical | TP5, TP6 |
| 2 | GND | PinHeader_1x01_P2.00mm_Vertical | TP7, TP8 |
| 1 | I/O_1 | PinHeader_1x01_P2.00mm_Vertical | TP9 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | I/O_2 | PinHeader_1x01_P2.00mm_Vertical | TP10 |
| 1 | I/O_3 | PinHeader_1x01_P2.00mm_Vertical | TP11 |
| 1 | I/O_4 | PinHeader_1x01_P2.00mm_Vertical | TP12 |
| 2 | TPSMC30CA | DIONM5436X244N | D1, D7 |
| 1 | BAS40-05 | TO252__DPAK__1 | D2 |
| 1 | SP0502BAJT | SOT-323_SC-70 | D3 |
| 3 | LED | LED_1206_3216Metric | D4, D5, D6 |
| 1 | 4u7 | SRN3015TA4R7M | L1 |
| 1 | 2n | LQG15WH0N7B02D | L2 |
| 2 | 10u | EEHZT1E331UP | C2, C15 |
| 8 | 100n | C_1206_3216Metric | C3, C4, C10, C11, C17, C18, C21, C24 |
| 1 | 47p | C_1206_3216Metric | C6 |
| 1 | 100u | EEHZT1E331UP | C7 |
| 1 | 33n | C_1206_3216Metric | C8 |
| 2 | 2n7 | C_1206_3216Metric | C9, C28 |
| 6 | 1u | C_1206_3216Metric | C12, C13, C14, C16, C19, C26 |
| 1 | 10n | C_1206_3216Metric | C20 |
| 2 | 12p | C_1206_3216Metric | C22, C23 |
| 1 | 4n7 | C_1206_3216Metric | C25 |
| 1 | 47u | CP_Elec_6.3x7.7 | C27 |
| 3 | 100 | R_1206_3216Metric | R1, R16, R18 |
| 4 | 0 | R_1206_3216Metric | R2, R3, R31, R32 |
| 2 | 5k1 | R_1206_3216Metric | R4, R5 |
| 2 | 32k | R_1206_3216Metric | R6, R8 |
| 5 | 10k | R_1206_3216Metric | R7, R13, R14, R15, R37 |
| 2 | 180k | R_1206_3216Metric | R9, R25 |
| 2 | 12k | R_1206_3216Metric | R10, R26 |
| 2 | 6k | R_1206_3216Metric | R11, R29 |
| 3 | 100k | R_1206_3216Metric | R12, R27, R28 |
| 5 | 1k | R_1206_3216Metric | R17, R19, R22, R23, R24 |
| 2 | 60 | R_1206_3216Metric | R20, R21 |
| 1 | 1k0 | R_1206_3216Metric | R30 |
| 2 | 1 | R_1206_3216Metric | R33, R34 |
| 1 | R | R_1206_3216Metric | R35 |
| 1 | 30k | R_1206_3216Metric | R36 |
| 1 | (10k) | R_1206_3216Metric | R38 |
Schematic main design files
The KiCad project lives in the HydrogreenPollub/legacy-pcb-motor-driver-unit repository on GitHub; these links point at the commit this page was built from.
- Layoutschematic-main.kicad_pcb
- Schematicschematic-main.kicad_sch
Schematic main: common questions
What microcontroller does the Schematic main use?
The Schematic main is built around the ESP32-S3FN8, from the ESP32 family.
How many components are on the Schematic main?
110 components, from 56 distinct parts. The full bill of materials is listed on this page.
Where can I download the Schematic main design files?
From the HydrogreenPollub/legacy-pcb-motor-driver-unit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Schematic main design in my own project?
Yes, under the terms of its MIT license, which HydrogreenPollub chose for the repository.
Can I test firmware for the Schematic main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in legacy-pcb-motor-driver-unit
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k