HardLabs

Matthews macbook air

HynixCJR·matthews-macbook-air·rpi/rpi-cm5io-Kicad/CM5IO.kicad_pcb

Matthews macbook air PCB layout, top view — open source Raspberry Pi board by HynixCJR

About the Matthews macbook air PCB

Matthews macbook air is an open source Raspberry Pi PCB design by HynixCJR, published on GitHub. It is a 4-layer board measuring 160 × 90 mm, with 62 components from 35 distinct parts.

Its main chip is the ComputeModule5-CM5, from the Raspberry Pi family. Other key parts include the TPD4EUSB30, MagJack-A70-112-331N126, 74LVC1G07SE-7, AP22653W6 and ASEK-32.768KHZ-L-R-T. By type, the board carries 19 capacitors, 14 resistors, 13 connectors, 9 ICs, 3 diodes and 1 battery holder.

From the project

SOLIDWORKS files for my home server/NAS

These files have been created in version 8 of KiCAD.

Some of the 3d models need to be downloaded form the following places and put into the CM5IO.3shapes directory some models are approximations.

https://datasheets.raspberrypi.org/cm5/CM5-step.zip https://www.molex.com/molex/products/part-detail/memorycardsocket/5033981892

The models provided in the 3dmodels directory are from various manufacturers including Diodes, Hirose, MTCONN, Toby, TRXCOM. Terms and conditions for the use of the models remain with the original manufacture.

Main components on the Matthews macbook air

TPD4EUSB30MagJack-A70-112-331N12674LVC1G07SE-7AP22653W6ASEK-32.768KHZ-L-R-TAP3441SHE-7BRT9742SNGVRT9742GGJ5

Matthews macbook air bill of materials (BOM)

62 components, 35 distinct parts.

QtyPartRefs
2
TPD4EUSB30
U1, U2
1
MagJack-A70-112-331N126
U3
1
74LVC1G07SE-7
U5
1
AP22653W6
U6
1
ASEK-32.768KHZ-L-R-T
U7
1
AP3441SHE-7B
U8
1
RT9742SNGV
U12
1
RT9742GGJ5
U18
1
Conn_02x07_Odd_Even
J2
1
Bus_M.2_Socket_M
J4
2
Conn_01x22_Female
J5, J16
2
THD-02-R
J6, J9
1
Micro_SD_Card_Det
J7
1
THD-20-R
J8
2
690-019-298-412
J10, J22
1
USB_C_Receptacle_USB2.0
J11
1
USB3_A
J12
1
JST_SHBM04B-SRSS-TB
J14
1
Battery_Cell
BT1
1
ComputeModule5-CM5
Module1
Show 15 more
QtyPartRefs
1
Right angle Tact button
SW1
1
LED Red
D1
2
LED Green
D2, D3
1
2.2uH
L1
7
100n
C1, C9, C10, C12, C13, C18, C19
10
10u
C2, C4, C5, C6, C7, C8, C14, C15 +2
1
100uF
C3
1
4.7nF
C11
3
1k
R1, R10, R17
2
470R
R2, R3
1
0R
R5
5
2.2K 1%
R6, R7, R8, R9, R16
1
15K 1%
R12
1
100K 1%
R14
1
10K 1%
R15

Matthews macbook air design files

The KiCad project lives in the HynixCJR/matthews-macbook-air repository on GitHub; these links point at the commit this page was built from.

Matthews macbook air: common questions

What microcontroller does the Matthews macbook air use?

The Matthews macbook air is built around the ComputeModule5-CM5, from the Raspberry Pi family.

How big is the Matthews macbook air PCB?

The Matthews macbook air measures 160 × 90 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Matthews macbook air?

62 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Matthews macbook air design files?

From the HynixCJR/matthews-macbook-air repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Matthews macbook air design in my own project?

The repository has no license, so all rights stay with HynixCJR. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Matthews macbook air without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards