LD2024 ESP32 Radar
Jack05325·LD2024_ESP32_Radar
About the LD2024 ESP32 Radar PCB
LD2024 ESP32 Radar is an open source ESP32 PCB design by Jack05325, published on GitHub. It is a 2-layer board measuring 98 × 28 mm, with 42 components from 26 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the D3V3XA4B10LP, TLV75801PDBV, AHT20, TP4056-42-ESOP8 and DW01A. By type, the board carries 16 resistors, 8 capacitors, 6 ICs, 5 diodes, 1 transistor and 1 battery holder.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
PCB integrating an LD2024 radar sensor and an ESP32 microcontroller for passive human presence detection in indoor environments. The ESP32 processes the radar data and sends occupancy information to a home automation server over Wi‑Fi, enabling smart control of room functions.
Questo progetto contiene i file di progettazione PCB per un modulo radar basato sul sensore LD2420 integrato con un microcontrollore ESP32. Il sensore LD2420 è un radar a onde millimetriche a 24GHz per il rilevamento di presenza umana, ideale per applicazioni di domotica e automazione.
- Sensore Radar: LD2420 a 24GHz per rilevamento preciso di presenza e movimento - Microcontrollore: ESP32 con connettività WiFi e Bluetooth integrata - Formato PCB: Design compatto e ottimizzato per facile integrazione - Output: Dati di rilevamento elaborabili via WiFi/Bluetooth
Main components on the LD2024 ESP32 Radar
LD2024 ESP32 Radar bill of materials (BOM)
42 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1 | ESP32-S3-MINI-1 | U1 |
| 1 | D3V3XA4B10LP | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U2 |
| 1 | TLV75801PDBV | SOT-23-5 | U3 |
| 1 | AHT20 | PSON100P300X300X110-6N | U4 |
| 1 | TP4056-42-ESOP8 | SOIC127P600X175-9N | U5 |
| 1 | DW01A | SOT-23-6 | U6 |
| 1 | FS8205A | SOP65P640X120-8N | Q1 |
| 2 | SW_Push | SW_SPST_B3U-1000P | BOOT2, RESET1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | LD2420 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB_C1 |
| 3 | LED | LED_0805_2012Metric | D1, D2, D3 |
| 2 | D | D_SMA | D5, D6 |
| 3 | 0.1uF | C_0805_2012Metric | C1, C2, C5 |
| 4 | 10uF | C_0805_2012Metric | C3, C4, C7, C8 |
| 1 | 100nF | C_0805_2012Metric | C6 |
| 1 | 10K | R_0805_2012Metric | R1 |
| 2 | 5.1K | R_0805_2012Metric | R2, R5 |
| 1 | 1M | R_0805_2012Metric | R3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 200K | R_0805_2012Metric | R4 |
| 4 | 0 | R_0805_2012Metric | R6, R7, R10, R11 |
| 2 | 4.7k | R_0805_2012Metric | R8, R9 |
| 1 | 1.2K | R_0805_2012Metric | R12 |
| 3 | 1K | R_0805_2012Metric | R13, R14, R15 |
| 1 | 100 | R_0805_2012Metric | R16 |
LD2024 ESP32 Radar design files
The KiCad project lives in the Jack05325/LD2024_ESP32_Radar repository on GitHub; these links point at the commit this page was built from.
- LayoutLD2420_Radar_ESP32.kicad_pcb
- SchematicLD2420_Radar_ESP32.kicad_sch
LD2024 ESP32 Radar: common questions
What microcontroller does the LD2024 ESP32 Radar use?
The LD2024 ESP32 Radar is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the LD2024 ESP32 Radar PCB?
The LD2024 ESP32 Radar measures 98 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LD2024 ESP32 Radar?
42 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the LD2024 ESP32 Radar design files?
From the Jack05325/LD2024_ESP32_Radar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LD2024 ESP32 Radar design in my own project?
The repository has no license, so all rights stay with Jack05325. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LD2024 ESP32 Radar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k