15 open source boards using the TLV75801PDBV

Real designs built with the TLV75801PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the TLV75801PDBV

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TLV75801PDBV connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 µF).
  • The FB pin has a series resistor on 6 of 8 designs, most often 100 kΩ (then 51 kΩ).
  • The FB pin has a resistor to GND on 6 of 8 designs, most often 200 kΩ (then 20 kΩ).
  • The IN pin is tied to 5V on 6 of 8 designs (a signal on 2).
INpin 1Connected to: 5V 75% · a signal 25%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: TPS72301 25%, another IC 25% · 3.3V 38%
  • Capacitor to GND on 38% · 470 nF (2), 10 µF (2)
FBpin 4Connected to: Signal 100%
  • Series resistor on 75% · 100 kΩ (2), 51 kΩ (1), 2 kΩ (1)
  • Resistor to GND on 75% · 200 kΩ (3), 20 kΩ (2), 16.9 kΩ (1)
  • Pull-up to 3.3V on 38% · 1 MΩ (2), 220 kΩ (1)
OUTpin 5Connected to: Another IC 38%, MCP4726 25%, a connector 25% · 3.3V 38%
  • Capacitor to GND on 88% · 100 nF (7), 10 µF (4), 2.2 µF (2)
  • Series resistor on 63% · 100 kΩ (2), 2 kΩ (1), 20 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LCD Adapter by Decktrix-Lab, 1p6V to m1p6V bias gum by esl-epfl, VersaSens by esl-epfl and FabRice by dev-campusfab.

The TLV75801PDBV in open source designs

The gallery holds 15 open source boards using the TLV75801PDBV from 8 GitHub repositories; a typical one measures about 55 × 45.8 mm and carries around 42 components.

87% use four copper layers or more, and 20% carry an open source license.

The most starred is LCD Adapter by Decktrix-Lab.

Microcontrollers on boards using the TLV75801PDBV

TLV75801PDBV: common questions

Where can I find a TLV75801PDBV reference design?

Each of the 15 boards on this page is a real design using the TLV75801PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75801PDBV OUT pin connected?

The OUT pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TLV75801PDBV.

What resistor goes on the TLV75801PDBV FB pin?

The FB pin has a series resistor on 6 of 8 designs, most often 100 kΩ (then 51 kΩ). Counted from the KiCad layouts of 8 open source designs using the TLV75801PDBV.

How is the TLV75801PDBV IN pin connected?

The IN pin is tied to 5V on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the TLV75801PDBV.

What parts are used alongside the TLV75801PDBV?

The SN74AXC4T774RSVR, 24AA02E-OT, 74AHC1G04, 74AHC244 and 74AHCT1G08 appear in the most repositories here.

Which microcontrollers do boards using the TLV75801PDBV use?

Most are built on ESP32 (4).

How big is a typical board using the TLV75801PDBV?

The median is 55 × 45.8 mm, and 13% are two-layer designs.

What is the most popular open source board using the TLV75801PDBV?

By GitHub stars, LCD Adapter by Decktrix-Lab, with 63 stars.

Can I simulate one of these boards using the TLV75801PDBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part