Stridophone — Bioacoustic Insect Detector
About the Stridophone — Bioacoustic Insect Detector PCB
Stridophone — Bioacoustic Insect Detector is an open source ESP32 PCB design by jayis1, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 18 components from 15 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the STM32H743VIT6, ADXL355BCCZ, SHT45-AD1F and BQ25895RTW. By type, the board carries 5 ICs, 4 microphones, 4 diodes, 3 capacitors, 1 connector and 1 resistor.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
Author: jayis1 License: MIT Version: 1.0.0
Insect pests cause billions of dollars of damage annually to stored grain, timber structures, vineyards, greenhouses, and homes. Conventional detection relies on visual inspection or sticky traps — both lag indicators that detect an infestation after it is established. Stridophone flips the timeline: it continuously listens for the species-specific acoustic signatures insects produce when they feed, mate, or communicate, and raises an alert the moment a target species' call pattern emerges above the ambient noise floor.
Main components on the Stridophone — Bioacoustic Insect Detector
Stridophone — Bioacoustic Insect Detector bill of materials (BOM)
18 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743VIT6 | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U2 |
| 1 | ADXL355BCCZ | VLCC-14 | U7 |
| 1 | SHT45-AD1F | SHT4x | U8 |
| 1 | BQ25895RTW | VQFN-32 | U9 |
| 1 | MicroSD | MicroSD | J2 |
| 4 | SPH0641LU4H-1 | SPH0641LU4H-1 | MK1, MK2, MK3, MK4 |
| 1 | RED | LED_0603 | D1 |
| 1 | GRN | LED_0603 | D2 |
| 1 | YEL | LED_0603 | D3 |
| 1 | BLU | LED_0603 | D4 |
| 1 | 100nF | C_0402 | C1 |
| 1 | 10uF | C_0603 | C2 |
| 1 | 4.7uF | C_0805 | C3 |
| 1 | 470R | R_0402 | R1 |
Stridophone — Bioacoustic Insect Detector design files
The KiCad project lives in the jayis1/hardware-design-lab repository on GitHub; these links point at the commit this page was built from.
Stridophone — Bioacoustic Insect Detector: common questions
What microcontroller does the Stridophone — Bioacoustic Insect Detector use?
The Stridophone — Bioacoustic Insect Detector is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Stridophone — Bioacoustic Insect Detector PCB?
The Stridophone — Bioacoustic Insect Detector measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stridophone — Bioacoustic Insect Detector?
18 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stridophone — Bioacoustic Insect Detector design files?
From the jayis1/hardware-design-lab repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stridophone — Bioacoustic Insect Detector design in my own project?
The repository has no license, so all rights stay with jayis1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stridophone — Bioacoustic Insect Detector without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hardware-design-lab
STM32TideBand — Wrist-Worn Hydrographic Current Profiler
62 × 52 mm24 parts5LNo license0
Nordic nRFCryo-Sentinel
95 × 65 mm23 parts2LNo license0
STM32GrainGuard — In-Silo Grain Condition Probe
26.9 × 45.9 mm21 parts4LNo license0
STM32Tensilguard
100 × 60 mm12 parts4LNo license0
Nordic nRFThermoGlyph — Wearable Thermal-Tactile Display
60 × 45 mm10 parts4LNo license0
ESP32Pollen scout
80 × 55 mm10 parts4LNo license0
EAG-7000 — Edge AI Gateway
100 × 72 mm10 parts10LNo license0
STM32Soilchord — Geotechnical Acoustic Soil Profiler
100 × 100 mm6 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k