ESP32S3 Audio Cam POE
About the ESP32S3 Audio Cam POE PCB
ESP32S3 Audio Cam POE is an open source ESP32 PCB design by jharvey, published on GitHub under the MIT license. It is a 4-layer board measuring 109.4 × 129.7 mm, with 320 components from 87 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the TLV62568DBVR, MT9221CT-06BR5, USBLC6-2SC6, XC6206-1.5NR and XC6206-2.8V. By type, the board carries 104 capacitors, 101 resistors, 19 ICs, 18 diodes, 11 inductors and 8 transistors.
It belongs with the audio designs in this gallery.
From the project
ESP32 S3 with Audio, Camera and POE Ethernet
This is a PCB layout for ESP32S3 with OV2640 / OV5640 camera. This was designeed with KiCAD version 9. The boards major features include: Camera. 2 way audio. Hardwired Ethernet including POE. Camera pan / tilt servos and lamp control. record to SD card. misc outputs to drive misc motors or similar outputs. Battery powered option with Lion type of battery. Stream video to NVR recording station.
Main components on the ESP32S3 Audio Cam POE
ESP32S3 Audio Cam POE bill of materials (BOM)
320 components, 87 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV62568DBVR | SOT-23-5 | U1 |
| 1 | MT9221CT-06BR5 | Current-sensor_MT9221CT-06BR5_C879632 | U2 |
| 2 | USBLC6-2SC6 | SOT-23-6 | U3, U4 |
| 1 | XC6206-1.5NR | SOT-23-3 | U5 |
| 1 | XC6206-2.8V | SOT-23-3 | U6 |
| 2 | ESP32-S3 | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm_ThermalVias | U7, U8 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U9 |
| 2 | W25Q128JVSIQ Winbond Elec | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U10, U13 |
| 1 | TM1637 | digital tube drivers_c2962580 | U11 |
| 1 | C695836 DS18B20U(UMW) | DS18B20_C695836 | U12 |
| 1 | DP9900M-5V | DP9900M_C5380106 | U14 |
| 1 | MAX98357AETE+T | MAX98357AETE+T_C910544 | U15 |
| 2 | ICS-43434 MSM261S4030H0R | LGA-8_4.0x3.0mm_P0.84mm_MSM261S4030H0R | U16, U17 |
| 1 | AXP2101 | QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm_ThermalVias | U18 |
| 1 | RFM69HCW | RFM69HCW | U19 |
| 8 | AO3401A Alpha & Omega Semicon | Q_SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | X322525MOB4SI Yangxing Tech | OSC-SMD_4P-L3.2-W2.5-BL | X1 |
| 2 | C9010 40MHz, 15pF | OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI | Y1, Y2 |
| 1 | DST310S 32.768KHz 32.768KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | PJ-316C-6A | SMD_3.5mm_Audio_Connectors_(Headphones)_C707223 | CN1 |
Show 67 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AFC01-S24FCC-00 | OV2640_connector_AFC01-S24FCC-00 | FPC1 |
| 2 | C2927039 Connector, USB-TYPE-C-16P | TYPE-C-SMD_HX-TYPE-C-16PIN | J1, J2 |
| 1 | HC-RJ45-055-4_8P8C_SHIELDED HC-RJ45-055-4_8P8C_Shielded | HC-RJ45-055-4_C3000211 | J9 |
| 2 | KH-3216-H0209 kinghelm(金航标) | ANT-SMD_L3.2-W1.6-KH-3216F245C04 | ANT1, ANT2 |
| 1 | H2U646MHLQ0200 | ANT-SMD_H2U646MHLQ0200 | ANT3 |
| 9 | C318884 Tactile Button, 160gf XKB Connectivity | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | BOOT1, BOOT2, PB1, PB2, PB3, PB4, PB5, RST2 +1 |
| 1 | BH-18650-B1BA002 | BATTERY-SMD_18650-1S-L77.1-W20.7-1 | BT1 |
| 1 | C393941 TF PUSH | TF-PUSH-SD-CARD_C393941 | CARD1 |
| 1 | C3018545 NTC UNI-ROYAL(Uniroyal Elec) | R_0402 | NTC1 |
| 1 | H1102NLT | H1102NLT_C18584 | T1 |
| 33 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | TST-R1, TST-R2, TST-R3, TST-R4, TST-R5, TST-R6, TST-R7, TST-R8 +25 |
| 1 | SLS0563DRA1GD | 3x7-seg_LED-RED_C2913084 | DISP1 |
| 3 | 1N4148W ST(Semtech) | D_SOD-123 | D1, D2, D11 |
| 2 | C2296 Yellow Hubei KENTO Elec | D_0805 | D3, D14 |
| 3 | C2297 Green Hubei KENTO Elec | D_0805 | D4, D8, D15 |
| 2 | MB6S | MB6S-C82584 | D5, D6 |
| 1 | SMAJ58A hongjiacheng | D_SMA | D7 |
| 1 | WS2812B | LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | D9 |
| 1 | C2286 Red Hubei KENTO Elec | D_0603 | D10 |
| 1 | C2290 White Hubei KENTO Elec | D_0603 | D12 |
| 4 | C131280 IR | IR-LED_C131280 | D13, D16, D17, D18 |
| 1 | 2.2UH 2.2uH | L_Wurth_WE-LQSH-4020 | L1 |
| 2 | 2NH 2nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2, L11 |
| 3 | C14033 3.9nH,300mA Sunlord | L_0402 | L3, L4, L10 |
| 5 | C435392 1uH,3.3A Sunlord | L_1008_2520Metric | L5, L6, L7, L8, L9 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0805 | C1 |
| 1 | 1NF 1nF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C2 |
| 7 | 10PF 10pF Samsung Electro-Mechanics | C_0402 | C3, C4, C6, C7, C33, C34, C106 |
| 32 | 100NF 100nF YAGEO | C_0603 | C5, C11, C13, C19, C20, C21, C24, C25 +24 |
| 4 | 10UF 10uF Samsung Electro-Mechanics | C_0402 | C8, C14, C74, C102 |
| 2 | 20PF 20pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C9, C10 |
| 2 | 1PF 1pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C15, C99 |
| 8 | 1UF 1uF Samsung Electro-Mechanics | C_0603 | C16, C17, C18, C23, C26, C42, C43, C48 |
| 1 | 15PF 15pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C22 |
| 3 | 10UF 10uF Murata Electronics | C_0805 | C36, C54, C61 |
| 1 | 10NF 10nF Samsung Electro-Mechanics | C_0402 | C39 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0603 | C40 |
| 2 | 100PF 100pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C45, C47 |
| 2 | 6.8NF 6.8nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C50, C51 |
| 2 | 220NF 220nF Samsung Electro-Mechanics | C_0603 | C52, C53 |
| 4 | 100NF 100nF Samsung Electro-Mechanics | C_0805 | C59, C60, C62, C63 |
| 1 | 22UF 22uF Samsung Electro-Mechanics | C_0805 | C64 |
| 1 | 1NF 1nF FH(Guangdong Fenghua Advanced Tech) | C_1206 | C65 |
| 2 | 220PF 220pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C66, C67 |
| 7 | 1UF 1uF Samsung Electro-Mechanics | C_0402 | C73, C88, C90, C91, C92, C93, C94 |
| 6 | 22UF 22uF Samsung Electro-Mechanics | C_0603 | C75, C76, C77, C78, C95, C97 |
| 10 | 2.2UF 2.2uF Samsung Electro-Mechanics | C_0402 | C79, C80, C81, C82, C83, C84, C85, C86 +2 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0402 | C89 |
| 1 | 10U 10uF | C_0805 | C103 |
| 1 | 4.7PF 4.7pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C104 |
| 1 | 100nF Samsung Electro-Mechanics | C_0805 | C107 |
| 3 | 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R1, R2, R3 |
| 4 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R4, R5, R6, R7 |
| 8 | 10MΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R8, R14, R42, R54, R55, R56, R79, R82 |
| 7 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R9, R33, R37, R68, R71, R72, R101 |
| 17 | 33Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R10, R11, R12, R13, R88, R89, R90, R91 +9 |
| 10 | 1MΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R15, R20, R43, R47, R57, R58, R63, R77 +2 |
| 24 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R16, R17, R18, R19, R28, R30, R31, R38 +16 |
| 4 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R21, R85, R86, R87 |
| 6 | 20Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R22, R23, R24, R25, R26, R27 |
| 3 | 12kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R29, R32, R36 |
| 2 | 680Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R34, R35 |
| 2 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R40, R41 |
| 3 | 47Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R44, R45, R46 |
| 2 | 82Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R48, R49 |
| 4 | 75Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R59, R60, R61, R62 |
| 2 | 220kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R74, R76 |
ESP32S3 Audio Cam POE design files
The KiCad project lives in the jharvey/ESP32S3_Audio_Cam_POE repository on GitHub; these links point at the commit this page was built from.
ESP32S3 Audio Cam POE: common questions
What microcontroller does the ESP32S3 Audio Cam POE use?
The ESP32S3 Audio Cam POE is built around the ESP32-S3, from the ESP32 family.
How big is the ESP32S3 Audio Cam POE PCB?
The ESP32S3 Audio Cam POE measures 109.4 × 129.7 mm, has 4 copper layers and is 1.6094 mm thick.
How many components are on the ESP32S3 Audio Cam POE?
320 components, from 87 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32S3 Audio Cam POE design files?
From the jharvey/ESP32S3_Audio_Cam_POE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32S3 Audio Cam POE design in my own project?
Yes, under the terms of its MIT license, which jharvey chose for the repository.
Can I test firmware for the ESP32S3 Audio Cam POE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ESP32S3_Audio_Cam_POE
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k