Flex smart card
kamaljavvadi16-alt·flex_smart_card·hardware/flex-box-v1.6/flex-box-v1.6.kicad_pcb
About the Flex smart card PCB
Flex smart card is an open source ESP32 PCB design by kamaljavvadi16-alt, published on GitHub. It is a 4-layer board measuring 50 × 94.5 mm, with 62 components from 34 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the TPS63070, TP5100, DW01A, FS8205A and MAX17048. By type, the board carries 23 resistors, 21 capacitors, 7 connectors, 6 ICs, 2 diodes and 2 inductors.
Main components on the Flex smart card
Flex smart card bill of materials (BOM)
62 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E | U2 |
| 1 | TPS63070 | TPS63070RNM | U3 |
| 1 | TP5100 | NXP_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U4 |
| 1 | DW01A | SOT-23-6 | U5 |
| 1 | FS8205A | SOT-23-6 | U6 |
| 1 | MAX17048 | TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U7 |
| 1 | AO3401 | SOT-23 | Q1 |
| 1 | BATTERY | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | OLED | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | PN532 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | POWER_SW | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | JOYSTICK | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | C165948 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J6 |
| 1 | PROG | PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | GREEN | LED_D5.0mm | D1 |
| 1 | RED | LED_D5.0mm | D2 |
| 1 | 1.5UH 1.5uH | L_Changjiang_FNR4020S | L1 |
| 1 | 10UH 10uH | L_Changjiang_FNR5040S | L2 |
| 8 | 10UF 10uF | C_0805_2012Metric | C1, C3, C4, C5, C8, C9, C14, C17 |
| 1 | 470UF 470uF | CP_Elec_6.3x7.7 | C2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 100NF 100nF | C_0402_1005Metric | C6, C13, C15, C16, C18, C19, C20, C21 |
| 1 | 1UF 1uF | C_0402_1005Metric | C7 |
| 3 | 22UF 22uF | C_0805_2012Metric | C10, C11, C12 |
| 2 | 1k | R_0603_1608Metric | R1, R21 |
| 9 | 10K 10k | R_0603_1608Metric | R2, R3, R8, R9, R16, R19, R20, R22 +1 |
| 2 | 100K 100k | R_0603_1608Metric | R4, R5 |
| 2 | 220R | R_0603_1608Metric | R6, R7 |
| 1 | 470K 470k | R_0603_1608Metric | R10 |
| 1 | 150K 150k | R_0603_1608Metric | R11 |
| 1 | 0.1R | R_1206_3216Metric | R12 |
| 1 | 51K 51k | R_0402_1005Metric | R13 |
| 1 | 330R | R_0402_1005Metric | R14 |
| 1 | 0.2R | R_1206_3216Metric | R15 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R17, R18 |
Flex smart card design files
The KiCad project lives in the kamaljavvadi16-alt/flex_smart_card repository on GitHub; these links point at the commit this page was built from.
Flex smart card: common questions
What microcontroller does the Flex smart card use?
The Flex smart card is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Flex smart card PCB?
The Flex smart card measures 50 × 94.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flex smart card?
62 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flex smart card design files?
From the kamaljavvadi16-alt/flex_smart_card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flex smart card design in my own project?
The repository has no license, so all rights stay with kamaljavvadi16-alt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flex smart card without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: flex-box-v1.5, flex-box-v1.4, flex-box-v1.3, flex-box-v1.2, flex-box-v1.1, flex-box-v1
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k