CameraBoard
About the CameraBoard PCB
CameraBoard is an open source PCB design by Kmshanley, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 35 × 39 mm, with 23 components from 14 distinct parts.
Other key parts include the TPS7A0228PDBVR, TMP117MAIDRVR, MT9P006I12STCU and ORION-B16. By type, the board carries 12 capacitors, 4 ICs, 3 connectors, 3 resistors and 1 crystal.
It belongs with the sensors designs in this gallery.
From the project
The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.
The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.
Organization ------------------------ This repository is divided into two primary sections: ### Test > Contains all firmware related to testing boards or individual components. ### Flight > Contains the development for the main flight firmware that will be deployed in space.
Main components on the CameraBoard
CameraBoard bill of materials (BOM)
23 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A0228PDBVR | SOT95P280X145-5N | IC1 |
| 1 | TMP117MAIDRVR | SON65P200X200X80-7N | IC2 |
| 1 | MT9P006I12STCU | LCC70P1000X1000X125-48N | U1 |
| 1 | ORION-B16 | U-SkyTraq-ORION-B16 | U3 |
| 1 | ECS-2520MV-480-CM-TR | ECS2520MV480CMTR | Y1 |
| 1 | ST4-20-1.50-L-D-P-TR | SAMTEC_ST4-20-1.50-L-D-P-TR | J1 |
| 1 | 2337019-1 | 23370191 | J2 |
| 1 | 10051922-2410ELF | 100519222410ELF | J4 |
| 6 | 0.1uF | C_0402_1005Metric | C1, C4, C5, C7, C10, C12 |
| 4 | 10uF | C_0402_1005Metric | C2, C3, C6, C11 |
| 1 | 100nF | C_0402_1005Metric | C8 |
| 1 | 1uF | C_0402_1005Metric | C9 |
| 2 | 100k | R_0402_1005Metric | R1, R2 |
| 1 | 10k | R_0402_1005Metric | R3 |
CameraBoard design files
The KiCad project lives in the Kmshanley/PicoSat-Initiative repository on GitHub; these links point at the commit this page was built from.
CameraBoard: common questions
How big is the CameraBoard PCB?
The CameraBoard measures 35 × 39 mm, has 4 copper layers and is 1 mm thick.
How many components are on the CameraBoard?
23 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the CameraBoard design files?
From the Kmshanley/PicoSat-Initiative repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CameraBoard design in my own project?
Yes, under the terms of its GPL-3.0 license, which Kmshanley chose for the repository.
More boards in PicoSat-Initiative
STM32OBCProto
89 × 54 mm110 parts4LGPL-3.03
STM32OBC-Flight
40 × 40 mm78 parts8LGPL-3.03
PassthroughBoardRev0 B
40 × 40 mm43 parts4LGPL-3.03
Pass through board
40 × 40 mm43 parts4LGPL-3.03
PassthroughBoardRev0 C
40 × 40 mm43 parts4LGPL-3.03
BaseplateBackup
64 × 58 mm38 parts4LGPL-3.03
CommsRev0
40 × 40 mm32 parts4LGPL-3.03
RP2040/RP2350BaseplateRev1
58 × 64 mm30 parts4LGPL-3.03
BaseplateRev1 B
58 × 64 mm29 parts4LGPL-3.03
TopExternalFaceRev1
50 × 50 mm28 parts4LGPL-3.03
ExternalFaces
47.8 × 47.8 mm26 parts8LGPL-3.03
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956