HardLabs

TopExternalFaceRev1

Kmshanley·PicoSat-Initiative·Hardware/TopExternalFaceRev1/TopExternalFaceRev1.kicad_pcb

TopExternalFaceRev1 PCB layout, top view — open source board by Kmshanley

About the TopExternalFaceRev1 PCB

TopExternalFaceRev1 is an open source PCB design by Kmshanley, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 50 × 50 mm, with 28 components from 21 distinct parts.

Other key parts include the DRV8212PDSGR, TMP117MAIDRVR, OPT4048DTSR and SPV1040T. By type, the board carries 10 capacitors, 4 ICs, 4 jumpers, 4 resistors, 3 switches and 1 connector.

It belongs with the sensors designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.

The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.

Organization ------------------------ This repository is divided into two primary sections: ### Test > Contains all firmware related to testing boards or individual components. ### Flight > Contains the development for the main flight firmware that will be deployed in space.

TopExternalFaceRev1, from the project README
From the project README

Main components on the TopExternalFaceRev1

DRV8212PDSGRTMP117MAIDRVROPT4048DTSRSPV1040T

TopExternalFaceRev1 bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
DRV8212PDSGR
IC1
1
TMP117MAIDRVR
IC2
1
OPT4048DTSR
IC3
1
SPV1040T
IC4
1
FTSH-105-XX-X-DV
J1
1
ADDR0
JP1
1
ADDR1
JP2
1
ADDR2
JP3
1
ADDR3
JP4
1
SM141K06TFV
S1
2
KXOB25-05X3TF
S2, S3
1
4.5v
D1
1
NRS4012T150MDGJ
L1
4
10uF
C1, C2, C3, C5
3
0.1uF
C4, C6, C9
1
4.7uF
C7
1
100nF
C8
1
1nF
C10
1
1K
R1
2
1M
R2, R4
Show 1 more
QtyPartRefs
1
420k
R3

TopExternalFaceRev1 design files

The KiCad project lives in the Kmshanley/PicoSat-Initiative repository on GitHub; these links point at the commit this page was built from.

TopExternalFaceRev1: common questions

How big is the TopExternalFaceRev1 PCB?

The TopExternalFaceRev1 measures 50 × 50 mm, has 4 copper layers and is 1 mm thick.

How many components are on the TopExternalFaceRev1?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the TopExternalFaceRev1 design files?

From the Kmshanley/PicoSat-Initiative repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TopExternalFaceRev1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which Kmshanley chose for the repository.

More boards in PicoSat-Initiative

Earlier revisions in the repo: TopExternalFaceRev0

Similar boards