14 open source boards using the TMP117MAIDRVR
Real designs built with the TMP117MAIDRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55STM32
NV-Meter rev b
curtisseizert
150 × 100 mm489 parts6LNo license42STM32
OBCProto
Kmshanley
89 × 54 mm110 parts4LGPL-3.03RP2040/RP2350
OMiGaS
XiaotianGuan
92 × 44 mm120 parts4LNo license0AVR/Arduino
Ugrow3
Dhyan-M
70 × 45 mm77 parts2LNo license0STM32
OBC-Flight
Kmshanley
40 × 40 mm78 parts8LGPL-3.03AVR/Arduino
UGrow3 Routed
Dhyan-M
70 × 45 mm77 parts2LNo license0Hat
mikegoelzer
152.4 × 76.2 mm33 parts2LCustom license0BaseplateBackup
Kmshanley
64 × 58 mm38 parts4LGPL-3.03RP2040/RP2350
BaseplateRev1
Kmshanley
58 × 64 mm30 parts4LGPL-3.03BaseplateRev1 B
Kmshanley
58 × 64 mm29 parts4LGPL-3.03TopExternalFaceRev1
Kmshanley
50 × 50 mm28 parts4LGPL-3.03ExternalFaces
Kmshanley
47.8 × 47.8 mm26 parts8LGPL-3.03CameraBoard
Kmshanley
35 × 39 mm23 parts4LGPL-3.03
How designs wire the TMP117MAIDRVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TMP117MAIDRVR connects to, and the resistors, capacitors and other passives placed on it.
- The V+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The ADD0 pin is tied to GND on 5 of 6 designs.
- The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 3.3 kΩ (then 2.2 kΩ).
- The SDA pin has a pull-up to 3.3V on 4 of 6 designs, most often 3.3 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: The microcontroller 50%, a connector 50% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ADD0pin 4 | Connected to: GND 83% · a signal 17% | — |
| V+pin 5 | Connected to: 3.3V 83% · a signal 17% |
|
| SDApin 6 | Connected to: The microcontroller 50%, a connector 33% · not connected 17% |
|
| EPpin 7 | Connected to: Not connected 67% · GND 33% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ClimateSprinklerController by kbx81, NV-Meter rev b by curtisseizert, BaseplateBackup by Kmshanley and Ugrow3 by Dhyan-M.
The TMP117MAIDRVR in open source designs
The gallery holds 14 open source boards using the TMP117MAIDRVR from 6 GitHub repositories; a typical one measures about 67 × 52 mm and carries around 58 components.
71% use four copper layers or more, and 57% carry an open source license.
The most starred is ClimateSprinklerController by kbx81.
Microcontrollers on boards using the TMP117MAIDRVR
What boards using the TMP117MAIDRVR are built for
TMP117MAIDRVR: common questions
Where can I find a TMP117MAIDRVR reference design?
Each of the 14 boards on this page is a real design using the TMP117MAIDRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TMP117MAIDRVR V+ pin?
The V+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TMP117MAIDRVR.
How is the TMP117MAIDRVR ADD0 pin connected?
The ADD0 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMP117MAIDRVR.
What pull-up resistor is used on the TMP117MAIDRVR SCL pin?
The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 3.3 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the TMP117MAIDRVR.
Which microcontrollers do boards using the TMP117MAIDRVR use?
Most are built on STM32 (3), AVR/Arduino (2), RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the TMP117MAIDRVR?
The median is 67 × 52 mm, and 29% are two-layer designs.
What is the most popular open source board using the TMP117MAIDRVR?
By GitHub stars, ClimateSprinklerController by kbx81, with 55 stars.
Can I simulate one of these boards using the TMP117MAIDRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.