GridWatcher

kylerichter36-coder·GridWatcher·Hardware/GridWatcher_v0.3/GriDwatcher china.kicad_pcb

GridWatcher PCB layout, top view — open source ESP32 board by kylerichter36-coder

About the GridWatcher PCB

GridWatcher is an open source ESP32 PCB design by kylerichter36-coder, published on GitHub. It is a 2-layer board measuring 113.4 × 69.2 mm, with 79 components from 51 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the HLK-10M05, BL0939, BQ24074RGT, SY8089A1AAC and MAX17048G_T10. By type, the board carries 31 resistors, 25 capacitors, 9 ICs, 3 diodes, 2 transistors and 2 connectors.

It belongs with the iot & wireless, power & battery and dev boards & breakouts designs in this gallery.

From the project

Monolithic 2-layer integrated telemetry and energy monitoring board designed for JLCPCB SMT assembly, replacing the modular v0.2 breakout carrier board.

Monolithic 2-layer integrated telemetry and energy monitoring board designed for JLCPCB SMT assembly, replacing the modular v0.2 breakout carrier board.

Board Dimensions: 113.40 mm x 69.22 mm (2-layer FR-4, 1.6 mm thickness, 1 oz copper) Microcontroller: ESP32-S3-WROOM-1-N16R8 (16MB Flash, 8MB Octal PSRAM, 2.4 GHz Wi-Fi + BLE 5) Cellular Modem: SIMCom A7670E LTE Cat-1 LGA module with micro-strip trace to test point / external antenna, paired with a hinged 6-pin Nano-SIM socket (J2) Energy Metering: BL0939 dual-channel energy measurement IC (UART interface to ESP32-S3) + ZMPT101K voltage…

Main components on the GridWatcher

GridWatcher bill of materials (BOM)

79 components, 51 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
HLK-10M05
U1
1
BL0939
U2
1
BQ24074RGT
U3
1
SY8089A1AAC
U4
1
MAX17048G_T10
U5
1
ESP32-S3-WROOM-1
U6
1
XTSDG08GWSIGA
U7
1
A7670C-LASS
SIMCOM(芯讯通无线科技)
U8
1
TXS0102DCUR
U9
2
BSS138
Q1, Q2
1
JST 2
J1
1
SIM_Card
J2
1
1A SB
F1
1
10D471K (275V AC RMS)
RV1
1
ACL
TP1
1
ACN
TP2
1
ZMPT101K
TR1
1
SS14
D1
1
LED
D2
1
BLED
D3
Show 31 more
QtyPartRefs
1
10μH
L1
1
2.2μH
L2
1
470 µF / 16V Low-ESR
C1
1
100μF/16V Low-ESR
C2
1
100 nF Ceramic Cap
C3
1
33 nF
C4
2
100 nF
C5, C17
3
10 uF
C6, C7, C9
1
10uF
C8
2
22μF
C10, C11
1
0.1μF
C12
6
100nF
C13, C14, C20, C21, C22, C23
1
10μF
C15
1
1μF
C16
1
10 µF
C18
1
470μF
C19
2
DNP
C24, C25
1
1kΩ 0.25W
R1
1
200 Ω 0.1%
R2
3
1kΩ
R3, R21, R28
2
412kΩ0.1%
R4, R5
3
4.7kΩ
R6, R14, R15
2
1k Ω
R7, R8
3
10k Ω
R9, R10, R11
1
45.3kΩ
R12
1
10.0kΩ
R13
5
10kΩ
R16, R17, R18, R29, R30
2
22Ω
R19, R20
1
22 Ω
R22
5
10 kΩ
R23, R24, R25, R26, R27
1
0Ω
R31

GridWatcher design files

The KiCad project lives in the kylerichter36-coder/GridWatcher repository on GitHub; these links point at the commit this page was built from.

GridWatcher: common questions

What microcontroller does the GridWatcher use?

The GridWatcher is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the GridWatcher PCB?

The GridWatcher measures 113.4 × 69.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GridWatcher?

79 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GridWatcher design files?

From the kylerichter36-coder/GridWatcher repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the GridWatcher design in my own project?

The repository has no license, so all rights stay with kylerichter36-coder. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the GridWatcher without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards