Custom meshtastic node
kyrg4z·custom-meshtastic-node·PCB/PCB.kicad_pcb
About the Custom meshtastic node PCB
Custom meshtastic node is an open source PCB design by kyrg4z, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 50 components from 31 distinct parts.
Other key parts include the HT-CT62, SAM-M10Q-00B, ER_OLEDM0.91_1x-I2C, TPS63001DRCR and BQ24074RGTR. By type, the board carries 17 capacitors, 17 resistors, 7 ICs, 2 connectors, 2 switches and 1 transistor.
It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.
From the project
Learning physics, network security, and communication protocols sparked my interest with radio systems and wireless communications.
A custom Meshtastic compatible LoRa communication device that is designed for off-grid messaging in areas where cellular/internet aren't available such as hiking trails, mountains, and forests. This device provides interface for phones to be able to send messages through long range radio through a decentralized mesh network.
A handheld LoRa mesh node built around the Heltec HT-CT62 module (ESP32-C3 + Semtech SX1262), with GPS, a small OLED status display, and a single 18650 cell with USB-C charging and full battery protection. The phone connects over Bluetooth and the node relays messages…

Main components on the Custom meshtastic node
Custom meshtastic node bill of materials (BOM)
50 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HT-CT62 Heltec Automation | Heltec_HT-CT62 | U1 |
| 1 | SAM-M10Q-00B SAM-M10Q u-blox | ublox_SAM-M8Q | U2 |
| 1 | ER_OLEDM0.91_1x-I2C https://ca.robotshop.com/products/091-inch-128x32-i2c-oled-display-blue | ER_OLEDM0.91_1x-I2C | U3 |
| 1 | TPS63001DRCR TPS63001 Texas Instruments | Texas_DRC0010J_ThermalVias | U4 |
| 1 | BQ24074RGTR BQ24074RGT Texas Instruments | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U6 |
| 1 | DW01A Shenzhen Slkormicro Semicon Co., Ltd. | SOT-23-6 | U7 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U8 |
| 1 | FS8205A Vishay Siliconix | TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_16P GCT | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 1042 18650 Keystone Electronics | BatteryHolder_Keystone_1042_1x18650 | J2 |
| 1 | 1206L150SLYR Littelfuse Inc. | Fuse_1206_3216Metric | F1 |
| 1 | SW_Push_Reset PTS810SJS250SMTR LFS | SW_SPST_PTS810 | SW1 |
| 1 | SW_Push_Boot PTS810SJS250SMTR LFS | SW_SPST_PTS810 | SW2 |
| 1 | AR0603FR-0710KL 10k YAGEO | R_0603_1608Metric | TH1 |
| 1 | LTST-C191KRKT CHG Lite-On Inc. | LED_0603_1608Metric | D1 |
| 1 | SRN3015-2R2M 2.2uH Bourns Inc. | L_Taiyo-Yuden_NR-30xx | L1 |
| 1 | GRT188R61H105KE13D 1uF Murata Electronics | C_0603_1608Metric | C1 |
| 8 | GMC21X7R106K25NT 10uF Murata Electronics | C_0805_2012Metric | C2, C3, C5, C6, C7, C10, C12, C15 |
| 1 | GCJ188R71E104KA12D 0.1uF Murata Electronics | C_0603_1608Metric | C8 |
| 6 | GCJ188R71E104KA12D 100nF Murata Electronics | C_0603_1608Metric | C9, C11, C16, C18, C20, C21 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC0603KRX5R8BB225 2.2uF YAGEO | C_0603_1608Metric | C13 |
| 2 | CR0603-FX-5101ELF 5.1k Bourns Inc. | R_0603_1608Metric | R1, R2 |
| 2 | RC0603FR-0722RL 22 YAGEO | R_0603_1608Metric | R3, R4 |
| 1 | RC0603FR-07100RL 100 YAGEO | R_0603_1608Metric | R5 |
| 1 | RC0603FR-073KL 3k YAGEO | R_0603_1608Metric | R6 |
| 1 | RC0603FR-073K09L 3.09k YAGEO | R_0603_1608Metric | R7 |
| 2 | RC0603FR-074K7L 4.7k YAGEO | R_0603_1608Metric | R8, R9 |
| 3 | AR0603FR-0710KL 10k YAGEO | R_0603_1608Metric | R10, R11, R19 |
| 2 | RC0603FR-07100KL 100k YAGEO | R_0603_1608Metric | R14, R15 |
| 1 | RC0603FR-07470RL 470 YAGEO | R_0603_1608Metric | R16 |
| 2 | RC0603FR-071KL 1k YAGEO | R_0603_1608Metric | R17, R18 |
Custom meshtastic node design files
The KiCad project lives in the kyrg4z/custom-meshtastic-node repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
- BOMPCB/PCB.csv
Custom meshtastic node: common questions
How big is the Custom meshtastic node PCB?
The Custom meshtastic node measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom meshtastic node?
50 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom meshtastic node design files?
From the kyrg4z/custom-meshtastic-node repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom meshtastic node design in my own project?
The repository has no license, so all rights stay with kyrg4z. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k