Primer Carrier for LattePanda Mu
About the Primer Carrier for LattePanda Mu PCB
Primer Carrier for LattePanda Mu is an open source PCB design by LattePandaTeam, published on GitHub under the MIT license. It is a 4-layer board measuring 146 × 102 mm, with 223 components from 58 distinct parts.
Other key parts include the TPAZ1023-04F, ULC0524P, RTL8111H-CG-RH, TL431DBZ and CH224K. By type, the board carries 82 capacitors, 61 resistors, 26 diodes, 18 connectors, 14 ICs and 8 transistors.
It belongs with the power & battery designs in this gallery.
From the project
All About LattePanda Mu N100/N305 Compute Module
- USB Type-C PD: 15V (Max 3A) - DC 5.5x2.5mm: 12~20V (Max 10A)
- PCIe 3.0 x4 slot (only available when using 12V power supply) - M.2 M Key 2230 (PCIe 3.0 x1) - M.2 E Key 2230 (PCIe 3.0 x1, USB2.0) - RTC battery socket (CR1220 3V) - CPU fan socket - Gravity-4P UART - Gravity-4P I2C
- USB 3.2 10Gbps x2 - Gigabit Ethernet - USB 2.0 x2 - HDMI 2.0
Main components on the Primer Carrier for LattePanda Mu
Primer Carrier for LattePanda Mu bill of materials (BOM)
223 components, 58 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPAZ1023-04F | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U1, U2 |
| 7 | ULC0524P | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U3, U4, U5, U9, U10, U11, U12 |
| 1 | RTL8111H-CG-RH | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | U6 |
| 1 | TL431DBZ | SOT-23 | U13 |
| 1 | CH224K | ESSOP-10-1EP_3.9x5mm_P1.0mm_EP3.2x2.3 | U14 |
| 2 | SY8253ADC | TSOT-23-6 | U15, U16 |
| 1 | LattePanda_Mu | LattePanda_Module_H8.0mm_Horizontal | A1 |
| 1 | Fan_4pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | M1 |
| 4 | 2N7002 | SOT-23 | Q1, Q5, Q6, Q8 |
| 3 | 2SK3018 | SOT-23 | Q2, Q3, Q4 |
| 1 | NCE30P28Q | MOSFET_PDFN8_3.3x3.3 | Q7 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 5 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1, J8, J10, J11, J14 |
| 1 | Bus_PCI_Express_x4 | PCIe_x4_Gen3Slot_Connectors | J2 |
| 1 | HDMI_A | HDMI_A_Molex_208658-1001_Horizontal | J3 |
| 1 | USB3_A_Stacked | USB3_A_Molex_48406-0001_Horizontal_Stacked | J4 |
| 1 | USB_A_Stacked | USB_A_CUI_UJ2-ADH-TH_Horizontal_Stacked | J5 |
| 1 | RJ45_RB1-125B8G1A | RJ45_UDE_RB1-125B8G1A | J6 |
| 4 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J7, J9, J12, J13 |
| 1 | Bus_M.2_Socket_M | PCIe_M.2_Connectors_P=0.5mm_H=4.2mm_KeyM | J15 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Bus_M.2_Socket_E | PCIe_M.2_Connectors_P=0.5mm_H=4.2mm_KeyE | J16 |
| 1 | Barrel_Jack_Switch | DC_Jack_DC007B_30V_10A | J17 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J18 |
| 1 | Battery_Cell | Battery_Holder_CR1220_S8411-45R | BT1 |
| 1 | 6V/50mA | R_0603_1608Metric | F1 |
| 2 | 6V/1A | Fuse_0805_2012Metric | F2, F3 |
| 1 | 6V/2A | R_0805_2012Metric | F4 |
| 1 | 6V/2A | Fuse_0805_2012Metric | F5 |
| 1 | Jumper_3_Bridged12 | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 2 | SW_Push | SW_Push_6x6x6 | SW1, SW2 |
| 11 | ESD5V0B03 | D_0402_1005Metric | D1, D2, D3, D5, D6, D7, D8, D10 +3 |
| 2 | 1N5819WS | D_SOD-323 | D4, D26 |
| 3 | LED_G | LED_0603_1608Metric | D9, D22, D23 |
| 3 | PESD24VS1UL-N | D_0402_1005Metric | D12, D13, D14 |
| 6 | SS54 | D_SMA | D15, D16, D17, D18, D19, D20 |
| 1 | 3V3 Izt=5mA | D_SOD-323 | D24 |
| 2 | 2.2uH/4.3A | L_Sunlord_SWPA4020S | L1, L2 |
| 12 | 220nF/50V | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 39 | 100nF/50V | C_0402_1005Metric | C9, C10, C13, C15, C17, C18, C19, C20 +31 |
| 2 | 100uF/25V | CP_Elec_6.3x7.7 | C11, C12 |
| 6 | 10uF/10V | C_0402_1005Metric | C14, C44, C51, C53, C57, C59 |
| 1 | 560uF/25V | CP_Elec_6.3x7.7 | C16 |
| 15 | 22uF/10V | C_0603_1608Metric | C30, C31, C32, C64, C65, C67, C68, C74 +7 |
| 2 | 12pF/50V | C_0402_1005Metric | C46, C47 |
| 5 | 1uF/16V | C_0402_1005Metric | C61, C62, C63, C66, C69 |
| 4 | 1K/1% | R_0402_1005Metric | R1, R11, R37, R47 |
| 12 | 10K/1% | R_0402_1005Metric | R2, R20, R21, R34, R35, R36, R38, R40 +4 |
| 9 | 2.2K/1% | R_0402_1005Metric | R3, R5, R15, R18, R19, R30, R39, R52 +1 |
| 2 | 1M/1% | R_0402_1005Metric | R4, R23 |
| 6 | 21.5K/1% | R_0402_1005Metric | R6, R41, R42, R54, R59, R68 |
| 10 | 470R/1% | R_0402_1005Metric | R7, R8, R9, R10, R13, R14, R16, R17 +2 |
| 1 | 2.49K/1% | R_0603_1608Metric | R22 |
| 4 | 0R/1% | R_0402_1005Metric | R27, R29, R32, R33 |
| 1 | 56K/1% | R_0402_1005Metric | R43 |
| 5 | 100K/1% | R_0402_1005Metric | R44, R45, R51, R76, R77 |
| 4 | 100R/1% | R_0402_1005Metric | R46, R48, R55, R69 |
| 1 | 75K/1% | R_0402_1005Metric | R57 |
| 2 | 4.7K/1% | R_0402_1005Metric | R60, R72 |
Primer Carrier for LattePanda Mu design files
The KiCad project lives in the LattePandaTeam/LattePanda-Mu repository on GitHub; these links point at the commit this page was built from.
Primer Carrier for LattePanda Mu: common questions
How big is the Primer Carrier for LattePanda Mu PCB?
The Primer Carrier for LattePanda Mu measures 146 × 102 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Primer Carrier for LattePanda Mu?
223 components, from 58 distinct parts. The full bill of materials is listed on this page.
Where can I download the Primer Carrier for LattePanda Mu design files?
From the LattePandaTeam/LattePanda-Mu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Primer Carrier for LattePanda Mu design in my own project?
Yes, under the terms of its MIT license, which LattePandaTeam chose for the repository.
More boards in LattePanda-Mu
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k