9 open source boards using the TPAZ1023-04F

Real designs built with the TPAZ1023-04F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TPAZ1023-04F

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPAZ1023-04F connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series capacitor on 6 of 6 designs, most often 100 nF.
  • Pin 2 has a series capacitor on 6 of 6 designs, most often 100 nF.
  • Pin 4 has a series capacitor on 6 of 6 designs, most often 100 nF.
  • Pin 5 has a series capacitor on 6 of 6 designs, most often 100 nF.
Pin 1Connected to: A connector 83%
  • Series capacitor on 100% · 100 nF (6)
  • Series resistor on 83% · 470 Ω (5)
Pin 2Connected to: A connector 83%
  • Series capacitor on 100% · 100 nF (6)
  • Series resistor on 83% · 470 Ω (5)
VSSpin 3, 8Connected to: GND 100%
Pin 4Connected to: A connector 83%
  • Series capacitor on 100% · 100 nF (6)
  • Series resistor on 83% · 470 Ω (5)
Pin 5Connected to: A connector 83%
  • Series capacitor on 100% · 100 nF (6)
  • Series resistor on 83% · 470 Ω (5)
NCpin 6, 7, 9, 10Connected to: A connector 83%
  • Series capacitor on 100% · 100 nF (24)
  • Series resistor on 83% · 470 Ω (20)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Primer Carrier for LattePanda Mu by LattePandaTeam, Lattepanda MOKA by piecol, Nvme Carrier for LattePanda Mu by El-Luhb and Cyberdeck Carrier for LattePanda Mu by imtua.

The TPAZ1023-04F in open source designs

The gallery holds 9 open source boards using the TPAZ1023-04F from 6 GitHub repositories; a typical one measures about 146 × 102 mm and carries around 252 components.

100% use four copper layers or more, and 78% carry an open source license.

The most starred is MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam.

Microcontrollers on boards using the TPAZ1023-04F

What boards using the TPAZ1023-04F are built for

TPAZ1023-04F: common questions

Where can I find a TPAZ1023-04F reference design?

Each of the 9 boards on this page is a real design using the TPAZ1023-04F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPAZ1023-04F pin 1 connected?

Pin 1 has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPAZ1023-04F.

How is the TPAZ1023-04F pin 2 connected?

Pin 2 has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPAZ1023-04F.

How is the TPAZ1023-04F pin 4 connected?

Pin 4 has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPAZ1023-04F.

What parts are used alongside the TPAZ1023-04F?

The SY8253ADC, ULC0524P, CH224K, LattePanda_Mu and RTL8111H-CG-RH appear in the most repositories here.

Which microcontrollers do boards using the TPAZ1023-04F use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the TPAZ1023-04F?

The median is 146 × 102 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPAZ1023-04F?

By GitHub stars, MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.

Can I simulate one of these boards using the TPAZ1023-04F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part