11 open source boards using the SY8253ADC
Real designs built with the SY8253ADC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MXM GPU Card Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm425 parts8LMIT305MuBook
LtBrain
170.2 × 142 mm260 parts4LMIT36Lattepanda MOKA
piecol
100 × 70.1 mm207 parts4LCERN-OHL-S-2.035Nvme Carrier all M2
El-Luhb
170.2 × 170.2 mm358 parts4LMIT12Cyberdeck Carrier for LattePanda Mu
imtua
160 × 80 mm147 parts4LGPL-3.01NOMAD
pat-gc
116 × 127.3 mm149 parts4LNo license0RP2040/RP2350
RP2040-Dual-TypeC-eMMC-Board
gorkemguven
63.7 × 41.1 mm124 parts4LMIT0Raspberry Pi
Lite Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm252 parts4LMIT305Nvme Carrier for LattePanda Mu
El-Luhb
170.2 × 170.2 mm339 parts4LMIT12Primer Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm223 parts4LMIT305Primer Carrier for LattePanda Mu
Astrid-Delestine
146 × 102 mm223 parts4LMIT0
How designs wire the SY8253ADC
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SY8253ADC connects to, and the resistors, capacitors and other passives placed on it.
- The BOOST pin has a series capacitor on 8 of 8 designs, most often 100 nF.
- The FB pin has a pull-up to 5V on 8 of 8 designs, most often 75 kΩ (then 21.5 kΩ).
- The FB pin has a resistor to GND on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
- The VIN pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOSTpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FBpin 3 | Connected to: Signal 100% |
|
| ENpin 4 | Connected to: SY8253ADC 75% |
|
| VINpin 5 | Connected to: SY8253ADC 63%, LattePanda_Mu 50% |
|
| SWpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Primer Carrier for LattePanda Mu by LattePandaTeam, MuBook by LtBrain, Lattepanda MOKA by piecol and Nvme Carrier for LattePanda Mu by El-Luhb.
The SY8253ADC in open source designs
The gallery holds 11 open source boards using the SY8253ADC from 8 GitHub repositories; a typical one measures about 146 × 102 mm and carries around 223 components.
100% use four copper layers or more, and 91% carry an open source license.
The most starred is MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam.
Parts used alongside the SY8253ADC
Microcontrollers on boards using the SY8253ADC
What boards using the SY8253ADC are built for
SY8253ADC: common questions
Where can I find a SY8253ADC reference design?
Each of the 11 boards on this page is a real design using the SY8253ADC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SY8253ADC BOOST pin connected?
The BOOST pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the SY8253ADC.
What pull-up resistor is used on the SY8253ADC FB pin?
The FB pin has a pull-up to 5V on 8 of 8 designs, most often 75 kΩ (then 21.5 kΩ). Counted from the KiCad layouts of 8 open source designs using the SY8253ADC.
How is the SY8253ADC VIN pin connected?
The VIN pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the SY8253ADC.
What parts are used alongside the SY8253ADC?
The ULC0524P, CH224K, TPAZ1023-04F, LattePanda_Mu and RTL8111H-CG-RH appear in the most repositories here.
Which microcontrollers do boards using the SY8253ADC use?
Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the SY8253ADC?
The median is 146 × 102 mm, and 0% are two-layer designs.
What is the most popular open source board using the SY8253ADC?
By GitHub stars, MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.
Can I simulate one of these boards using the SY8253ADC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.