HardLabs

EEE3088F-Design-Project

maarijbhai·EEE3088F-Design-Project·Main/Main.kicad_pcb

EEE3088F-Design-Project PCB layout, top view — open source board by maarijbhai
Simulate this board

About the EEE3088F-Design-Project PCB

EEE3088F-Design-Project is an open source PCB design by maarijbhai, published on GitHub. It is a 2-layer board measuring 80.6 × 61 mm, with 54 components from 35 distinct parts.

Other key parts include the BQ24074RGT, HUSB237-AA001-DN06R, RT9742GGJ5, INA219AXDCN and TPS63802DLAR. By type, the board carries 20 resistors, 19 capacitors, 9 ICs, 2 diodes, 1 transistor and 1 connector.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

A KiCad-designed power board for a maze-solving Micromouse robot: USB-C 9 V input, Li-ion charging with two current modes, battery monitoring over I2C, bidirectional motor drive, 3.3 V / 5 V rails and a low-leakage on/off switch.

A KiCad-designed power board for a maze-solving Micromouse robot: USB-C 9 V input, Li-ion charging with two current modes, battery monitoring over I2C, bidirectional motor drive, 3.3 V / 5 V rails and a low-leakage on/off switch.

EEE3088F Engineering Design, University of Cape Town, 2025 · Maarij Alam & Saeed Solomon

The university supplied the processor and sensing subsystems. This project designs the board that powers everything else, from schematic through PCB layout to JLCPCB production files.

Main components on the EEE3088F-Design-Project

BQ24074RGTHUSB237-AA001-DN06RRT9742GGJ5INA219AXDCNTPS63802DLARAMS1117-3.3DRV8833PWP

EEE3088F-Design-Project bill of materials (BOM)

54 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ24074RGT
U1
1
HUSB237-AA001-DN06R
U3
2
RT9742GGJ5
U4, U5
1
INA219AXDCN
INA219AxDCN
U6
1
TPS63802DLAR
U7
1
AMS1117-3.3
U9
2
DRV8833PWP
U10, U11
1
C6749
S9013 J3(RANGE:200-350)
Q3
1
C668623
TYPE-C 6P
J2
1
SS-12D11G3R
SW2
2
KT-0603R
D1, D2
1
470NH
470nH
L1
4
1u
C1, C8, C10, C11
2
2.2U
2.2u
C2, C5
2
0.01U
0.01u
C3, C6
2
10U
10u
C4, C18
1
4.7U
4.7u
C7
1
4.7U
4.7u
C9
2
22U
22u
C12, C13
1
0.1U
0.1u
C14
Show 15 more
QtyPartRefs
2
47U
47u
C15, C16
2
10UF
10uF
C17, C19
1
75K
75k
R1
1
C17928
1R
R3
4
10K
10k
R4, R14, R19, R23
3
R400
R5, R6, R17
2
1K5
1k5
R7, R8
1
2k
R9
1
4K3
4k3
R10
1
2K2
2k2
R11
1
150R
R12
1
1k
R13
2
100K
100k
R18, R21
1
330K
330k
R20
1
470K
470k
R22

EEE3088F-Design-Project design files

The KiCad project lives in the maarijbhai/EEE3088F-Design-Project repository on GitHub; these links point at the commit this page was built from.

EEE3088F-Design-Project: common questions

How big is the EEE3088F-Design-Project PCB?

The EEE3088F-Design-Project measures 80.6 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EEE3088F-Design-Project?

54 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EEE3088F-Design-Project design files?

From the maarijbhai/EEE3088F-Design-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EEE3088F-Design-Project design in my own project?

The repository has no license, so all rights stay with maarijbhai. Use it as a reference, and ask the author before reusing the design.

Similar boards