28 open source boards using the INA219AxDCN

Real designs built with the INA219AxDCN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the INA219AxDCN

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the INA219AxDCN connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 20 of 23 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 20 of 23 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VS pin has a decoupling capacitor on 19 of 23 designs, most often 100 nF (then 1 µF).
  • The IN- pin has a series resistor on 14 of 23 designs, most often 100 mΩ (then 10 Ω).
IN+pin 1Connected to: A connector 39% · BATT 17%
  • Series resistor on 57% · 100 mΩ (9), 10 Ω (5), 10 mΩ (2)
  • Series capacitor on 30% · 100 nF (6), 1 µF (1)
IN-pin 2Connected to: Signal 70% · VBATT_SENSE 30%
  • Series resistor on 61% · 100 mΩ (9), 10 Ω (4), 10 mΩ (2)
  • Series capacitor on 30% · 100 nF (6), 1 µF (1)
GNDpin 3Connected to: GND 100%
VSpin 4Connected to: 3.3V 91%
  • Decoupling capacitor on 83% · 100 nF (18), 1 µF (4), 10 µF (2)
SCLpin 5Connected to: The microcontroller 61%, a connector 48%
  • Pull-up to 3.3V on 87% · 10 kΩ (10), 4.7 kΩ (7), 2.2 kΩ (3)
SDApin 6Connected to: The microcontroller 61%, a connector 48%
  • Pull-up to 3.3V on 87% · 10 kΩ (10), 4.7 kΩ (7), 2.2 kΩ (3)
A0pin 7Connected to: GND 65% · a signal 26%
A1pin 8Connected to: GND 65% · a signal 30%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FC V5d Pro Rev1 by proveskit, Sigfox chicken coop by Jeija, PickleRick by icl-rocketry and OpenTRV-ESP by mpiraux.

The INA219AxDCN in open source designs

The gallery holds 28 open source boards using the INA219AxDCN from 23 GitHub repositories; a typical one measures about 86.5 × 78.9 mm and carries around 132 components.

61% use four copper layers or more, and 46% carry an open source license.

The most starred is FC V5d Pro Rev1 by proveskit.

Microcontrollers on boards using the INA219AxDCN

INA219AxDCN: common questions

Where can I find a INA219AxDCN reference design?

Each of the 28 boards on this page is a real design using the INA219AxDCN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the INA219AxDCN SCL pin?

The SCL pin has a pull-up to 3.3V on 20 of 23 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 23 open source designs using the INA219AxDCN.

What pull-up resistor is used on the INA219AxDCN SDA pin?

The SDA pin has a pull-up to 3.3V on 20 of 23 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 23 open source designs using the INA219AxDCN.

What decoupling capacitors do designs use on the INA219AxDCN VS pin?

The VS pin has a decoupling capacitor on 19 of 23 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 23 open source designs using the INA219AxDCN.

What parts are used alongside the INA219AxDCN?

The W25Q128JVS, ESP32-S3, SC4215, SN65HVD230 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the INA219AxDCN use?

Most are built on RP2040/RP2350 (8), ESP32 (7), STM32 (2) and WCH CH32/CH55x (1).

How big is a typical board using the INA219AxDCN?

The median is 86.5 × 78.9 mm, and 39% are two-layer designs.

What is the most popular open source board using the INA219AxDCN?

By GitHub stars, FC V5d Pro Rev1 by proveskit, with 6 stars.

Can I simulate one of these boards using the INA219AxDCN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part