5 open source boards using the HUSB237-AA001-DN06R
Real designs built with the HUSB237-AA001-DN06R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
EEE3088F project group 59
Khahulesingo144
80 × 55 mm55 parts2LNo license1Micromouse-Lula and-Rejoice
LlamaLuLu
82 × 60 mm65 parts2LNo license0EEE3088F-Micromouse power module-
May-engineer
73.7 × 53.9 mm65 parts2LNo license0EEE3088F MM Power Project
KLPJOA002
77.3 × 58.5 mm59 parts2LNo license0EEE3088F-Design-Project
maarijbhai
80.6 × 61 mm54 parts2LNo license0
How designs wire the HUSB237-AA001-DN06R
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HUSB237-AA001-DN06R connects to, and the resistors, capacitors and other passives placed on it.
- The VUSB pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 10 µF).
- The VSET pin has a resistor to GND on 5 of 5 designs, most often 75 kΩ.
- The D+ pin is left unconnected on 4 of 5 designs.
- The D- pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VUSBpin 2 | Connected to: A connector 60% · 9V 20% |
|
| VSETpin 3 | Connected to: Signal 100% |
|
| D+pin 4 | Connected to: Not connected 80% · a signal 20% | — |
| D-pin 5 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin 7 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EEE3088F project group 59 by Khahulesingo144, EEE3088F MM Power Project by KLPJOA002, Micromouse-Lula and-Rejoice by LlamaLuLu and EEE3088F-Design-Project by maarijbhai.
The HUSB237-AA001-DN06R in open source designs
The gallery holds 5 open source boards using the HUSB237-AA001-DN06R from 5 GitHub repositories; a typical one measures about 80 × 58.5 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is EEE3088F project group 59 by Khahulesingo144.
Parts used alongside the HUSB237-AA001-DN06R
What boards using the HUSB237-AA001-DN06R are built for
HUSB237-AA001-DN06R: common questions
Where can I find a HUSB237-AA001-DN06R reference design?
Each of the 5 boards on this page is a real design using the HUSB237-AA001-DN06R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the HUSB237-AA001-DN06R VUSB pin connected?
The VUSB pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the HUSB237-AA001-DN06R.
What resistor goes on the HUSB237-AA001-DN06R VSET pin?
The VSET pin has a resistor to GND on 5 of 5 designs, most often 75 kΩ. Counted from the KiCad layouts of 5 open source designs using the HUSB237-AA001-DN06R.
How is the HUSB237-AA001-DN06R D+ pin connected?
The D+ pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the HUSB237-AA001-DN06R.
What parts are used alongside the HUSB237-AA001-DN06R?
The INA219AIDCNR, AMS1117-3.3, AP22814AW5-7, DRV8833PWP and TS5A3159DCKR appear in the most repositories here.
How big is a typical board using the HUSB237-AA001-DN06R?
The median is 80 × 58.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the HUSB237-AA001-DN06R?
By GitHub stars, EEE3088F project group 59 by Khahulesingo144, with 1 stars.
Can I simulate one of these boards using the HUSB237-AA001-DN06R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.