Main

mawoka-myblock·ambient-air·Kicad/boards/main.kicad_pcb

Main PCB layout, top view — open source ESP32 board by mawoka-myblock

About the Main PCB

Main is an open source ESP32 PCB design by mawoka-myblock, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 36 components from 26 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MCP73831T-2ACI/MC, AP7361C-33SP-13, TPD4E05U06DQA, BQ27441-G1 and TPS2116DRL. By type, the board carries 12 resistors, 8 capacitors, 6 ICs, 4 diodes, 3 connectors and 3 switches.

Main components on the Main

Main bill of materials (BOM)

36 components, 26 distinct parts.

QtyPartRefs
1
MCP73831T-2ACI/MC
U1
1
AP7361C-33SP-13
U2
1
ESP32-C3-WROOM-02
U3
1
TPD4E05U06DQA
U4
1
BQ27441-G1
U10
1
TPS2116DRL
U11
1
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x02
J2
1
Conn_01x04
J3
2
SW_Push
SW1, SW3
1
MINI MSK12CO2
SW2
1
SMAJ5.0A
D1
3
LED
D2, D3, D4
2
1µF
C1, C12
3
4.7µF
C2, C5, C6
1
0.1µF
C3
1
10µF
C4
1
470nF
C11
3
10kΩ
R1, R12, R13
1
2kΩ
R2
Show 6 more
QtyPartRefs
1
100Ω
R3
2
40Ω
R4, R5
2
5.1kΩ
R9, R10
1
0.01Ω
R11
1
668kΩ
R16
1
220kΩ
R17

Main design files

The KiCad project lives in the mawoka-myblock/ambient-air repository on GitHub; these links point at the commit this page was built from.

Main: common questions

What microcontroller does the Main use?

The Main is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Main PCB?

The Main measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main?

36 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main design files?

From the mawoka-myblock/ambient-air repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Main design in my own project?

The repository has no license, so all rights stay with mawoka-myblock. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ambient-air

Similar boards