Stencil
mawoka-myblock·ambient-air·Kicad/stencil/stencil.kicad_pcb
About the Stencil PCB
Stencil is an open source ESP32 PCB design by mawoka-myblock, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 47 components from 33 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MCP73831T-2ACI/MC, AP7361C-33SP-13, TPD4E05U06DQA, SHT4x and STCC4-D1. By type, the board carries 13 resistors, 12 capacitors, 10 ICs, 4 connectors, 4 diodes and 3 switches.
Main components on the Stencil
Stencil bill of materials (BOM)
47 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/MC | DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U1 |
| 1 | AP7361C-33SP-13 | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U2 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U3 |
| 1 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U4 |
| 1 | SHT4x | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 1 | STCC4-D1 | STCC4DR3 | U6 |
| 1 | AHT20_C2757850 | SENSOR-SMD_L3.0-W3.0-P1.00-BR | U7 |
| 1 | SGP40-D-R4 | XCDR_SGP40-D-R4 | U8 |
| 1 | ICP-20100 | PQFN50P200X200X85-10N | U9 |
| 1 | BQ27441-G1 | Texas_S-PDSO-N12 | U10 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 2 | Conn_01x04 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3, J4 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 2 | SW_Push | SW-SMD_L6.0-W3.5-LS8.2 | SW1, SW3 |
| 1 | MINI MSK12CO2 | SW-SMD_MSK12CO2 | SW2 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 3 | LED | CP_EIA-3528-12_Kemet-T | D2, D3, D4 |
| 3 | 1µF | C_0805_2012Metric | C1, C9, C12 |
| 4 | 4.7µF | C_0805_2012Metric | C2, C5, C6, C10 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1µF | C_0805_2012Metric | C3 |
| 1 | 10µF | C_0805_2012Metric | C4 |
| 2 | 100nF | C_0805_2012Metric | C7, C8 |
| 1 | 470nF | C_0805_2012Metric | C11 |
| 3 | 10kΩ | R_0805_2012Metric | R1, R12, R13 |
| 1 | 2kΩ | R_0805_2012Metric | R2 |
| 1 | 100Ω | R_0603_1608Metric | R3 |
| 2 | 40Ω | R_0603_1608Metric | R4, R5 |
| 1 | 4.7Ω | R_0603_1608Metric | R6 |
| 1 | 12kΩ | R_0603_1608Metric | R7 |
| 1 | 10kΩ | R_0603_1608Metric | R8 |
| 2 | 5.1kΩ | R_0805_2012Metric | R9, R10 |
| 1 | 0.01Ω | R_0805_2012Metric | R11 |
Stencil design files
The KiCad project lives in the mawoka-myblock/ambient-air repository on GitHub; these links point at the commit this page was built from.
Stencil: common questions
What microcontroller does the Stencil use?
The Stencil is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Stencil PCB?
The Stencil measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stencil?
47 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stencil design files?
From the mawoka-myblock/ambient-air repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Stencil design in my own project?
The repository has no license, so all rights stay with mawoka-myblock. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stencil without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ambient-air
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k