HardLabs

Cc1101 receiver esp32

maxim75·cc1101_receiver_esp32·kicad/RfGateway.kicad_pcb

Cc1101 receiver esp32 PCB layout, top view — open source ESP32 board by maxim75

About the Cc1101 receiver esp32 PCB

Cc1101 receiver esp32 is an open source ESP32 PCB design by maxim75, published on GitHub. It is a 4-layer board measuring 49 × 55 mm, with 39 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. Other key parts include the E01C-ML01SP4, E07-400M10S, GT-USB-7010ASV, MCP1700T-3302E-TT and ME6211C33M5. By type, the board carries 18 capacitors, 8 ICs, 5 resistors, 3 connectors, 2 switches and 1 crystal.

It belongs with the rf & radio and displays & leds designs in this gallery.

From the project

ESP32-S3 firmware that receives RF packets from two radios simultaneously and displays decoded data on an SH1107 128×128 OLED and serial monitor.

ESP32-S3 firmware that receives RF packets from two radios simultaneously and displays decoded data on an SH1107 128×128 OLED and serial monitor.

- CC1101 — 433.92 MHz OOK packets from an ATtiny3226 transmitter (ELECHOUSE SmartRC-compatible protocol) - nRF24L01 — 2.4 GHz packets at 250 kbps, PA MAX

Board: ESP32-S3-DevKitC-1 (16 MB flash, PSRAM, native USB CDC)

Main components on the Cc1101 receiver esp32

ESP32-S3-WROOM-2E01C-ML01SP4E07-400M10SGT-USB-7010ASVMCP1700T-3302E-TTME6211C33M5E220-900T22S

Cc1101 receiver esp32 bill of materials (BOM)

39 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-2
U1
1
E01C-ML01SP4
U2
1
E07-400M10S
U3
1
GT-USB-7010ASV
U4
2
MCP1700T-3302E-TT
U5, U6
1
ME6211C33M5
U7
1
E220-900T22S
U8
1
32K
Y1
1
I2C
CN1
1
X2026WV-2*02-N0SN
CN2
1
HX-PH2.0-6AWB
JTAG
CN4
1
PH-2PWB
FPC1
1
FLASH
SW1
1
RESET
SW2
1
SS14
D1
6
100NF
100nF
C1, C2, C3, C11, C12, C13
1
22UF
22uF
C4
6
1UF
1uF
C5, C6, C7, C8, C9, C10
3
10UF
10uF
C14, C15, C16
2
15PF
15pF
C17, C18
Show 2 more
QtyPartRefs
2
5.1K
R1, R2
3
10K
R3, R4, R5

Cc1101 receiver esp32 design files

The KiCad project lives in the maxim75/cc1101_receiver_esp32 repository on GitHub; these links point at the commit this page was built from.

Cc1101 receiver esp32: common questions

What microcontroller does the Cc1101 receiver esp32 use?

The Cc1101 receiver esp32 is built around the ESP32-S3-WROOM-2, from the ESP32 family.

How big is the Cc1101 receiver esp32 PCB?

The Cc1101 receiver esp32 measures 49 × 55 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Cc1101 receiver esp32?

39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cc1101 receiver esp32 design files?

From the maxim75/cc1101_receiver_esp32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cc1101 receiver esp32 design in my own project?

The repository has no license, so all rights stay with maxim75. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cc1101 receiver esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards