2 open source boards using the E07-400M10S
Real designs built with the E07-400M10S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Cc1101 receiver esp32
maxim75
49 × 55 mm39 parts4LNo license1
E07400M10S
absmach
25.4 × 28.6 mm4 parts2LApache-2.016
The E07-400M10S in open source designs
The gallery holds 2 open source boards using the E07-400M10S from 2 GitHub repositories; a typical one measures about 37.2 × 41.8 mm and carries around 22 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is E07400M10S by absmach.
Microcontrollers on boards using the E07-400M10S
What boards using the E07-400M10S are built for
E07-400M10S: common questions
Where can I find a E07-400M10S reference design?
Each of the 2 boards on this page is a real design using the E07-400M10S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the E07-400M10S use?
Most are built on ESP32 (1).
How big is a typical board using the E07-400M10S?
The median is 37.2 × 41.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the E07-400M10S?
By GitHub stars, E07400M10S by absmach, with 16 stars.
Can I simulate one of these boards using the E07-400M10S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.