STM32F407VGTx-Connect
minhtenlado·STM32F407VGTx-Connect
About the STM32F407VGTx-Connect PCB
STM32F407VGTx-Connect is an open source ESP32 PCB design by minhtenlado, published on GitHub. It is a 4-layer board measuring 100 × 71.9 mm, with 80 components from 43 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the STM32F103CBTX, USBLC6-2SC6, STM32F407VGTX and AP63300WU-7. By type, the board carries 29 capacitors, 23 resistors, 8 connectors, 5 ICs, 4 switches and 4 diodes.
It belongs with the iot & wireless, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Custom STM32F407 development board featuring onboard STM32F103 CMSIS-DAP debugger, USB-C, ESP32-C3 Wi-Fi/BLE, UART, SWD, and GPIO expansion. Designed with KiCad 10.
4-Layer PCB | KiCad 10 | STM32F407 + STM32F103 + ESP32-C3
Custom STM32 development board based on the STM32F407VGTx (ARM Cortex-M4), designed in KiCad 10 with an STM32F103CBTx onboard debug-probe circuit, USB Type-C, ESP32-C3 Wi-Fi/Bluetooth LE, a 3.3 V / 3 A buck regulator, and GPIO expansion headers.
Bo mạch được thiết kế với bốn lớp đồng: F.Cu, In1.Cu, In2.Cu, B.Cu. Các hình dưới đây được lấy trực tiếp từ thư mục Images/ trong project.

Main components on the STM32F407VGTx-Connect
STM32F407VGTx-Connect bill of materials (BOM)
80 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103CBTX STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | STM32F407VGTX STM32F407VGTx | LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U4 |
| 1 | AP63300WU-7 | SOT95P280X100-6N | U5 |
| 1 | BC849 | SOT-23 | Q1 |
| 2 | 8MHZ 8MHz | Crystal_SMD_ECS_CSM3X-2Pin_7.6x4.1mm | Y1, Y2 |
| 1 | Dùng nạp cho U1 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 2 | GPIO_B_C_D | PinHeader_2x10_P2.54mm_Vertical | J4, J5 |
| 1 | GPIO_D_E | PinHeader_2x10_P2.54mm_Vertical | J11 |
| 1 | GPIO_A_B | PinHeader_2x10_P2.54mm_Vertical | J12 |
| 1 | ESP32_UART0_PROG | PinHeader_1x05_P2.54mm_Vertical | J13 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 3 | TS-1187A-B-A-B | SW_TS-1187A-B-A-B | S1, S2, S3 |
| 1 | F103_USER_SW_3V3_GND | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | BLUE | LED_0603_1608Metric | D2 |
| 1 | SS34 | D_SMA | D3 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED Red | LED_0805_2012Metric | D13 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 4.7UH 4.7uH | L_Bourns_SRP5030T | L1 |
| 16 | 100NF 100nF | C_0603_1608Metric | C1, C4, C5, C6, C7, C12, C14, C15 +8 |
| 4 | 20PF 20pF | C_0603_1608Metric | C2, C3, C27, C28 |
| 1 | 10UF 10uF | C_1206_3216Metric | C8 |
| 2 | 22UF 22uF | C_1206_3216Metric | C9, C24 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C10, C11 |
| 2 | 1UF 1uF | C_0603_1608Metric | C13, C62 |
| 1 | 10UF 10uF | C_0603_1608Metric | C23 |
| 1 | 56PF 56pF | C_0603_1608Metric | C26 |
| 2 | 100K 100k | R_0603_1608Metric | R1, R2 |
| 8 | 10K | R_0603_1608Metric | R3, R11, R14, R15, R18, R19, R20, R21 |
| 2 | 4K7 | R_0603_1608Metric | R5, R7 |
| 2 | 100R | R_0603_1608Metric | R6, R10 |
| 1 | 200R | R_0603_1608Metric | R8 |
| 1 | 220R | R_0603_1608Metric | R9 |
| 1 | 39K | R_0603_1608Metric | R12 |
| 1 | 1K5 | R_0603_1608Metric | R13 |
| 2 | 5.1K | R_0603_1608Metric | R16, R17 |
| 1 | 93.1K | R_0603_1608Metric | R22 |
| 1 | 30.1K | R_0603_1608Metric | R23 |
| 1 | 1K | R_0805_2012Metric | R58 |
STM32F407VGTx-Connect design files
The KiCad project lives in the minhtenlado/STM32F407VGTx-Connect repository on GitHub; these links point at the commit this page was built from.
STM32F407VGTx-Connect: common questions
What microcontroller does the STM32F407VGTx-Connect use?
The STM32F407VGTx-Connect is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the STM32F407VGTx-Connect PCB?
The STM32F407VGTx-Connect measures 100 × 71.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F407VGTx-Connect?
80 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F407VGTx-Connect design files?
From the minhtenlado/STM32F407VGTx-Connect repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32F407VGTx-Connect design in my own project?
The repository has no license, so all rights stay with minhtenlado. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F407VGTx-Connect without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k