Before rescue2
mitra42·frugal-iot-hw-sensor·claude-tools/layout/out/before_rescue2.kicad_pcb
About the Before rescue2 PCB
Before rescue2 is an open source ESP32 PCB design by mitra42, published on GitHub. It is a 2-layer board measuring 64 × 37 mm, with 63 components from 36 distinct parts.
Its main chip is the ESP32-C3-WROOM-02U-N4, from the ESP32 family. Other key parts include the TP4056, XB5353A, ME6211C33M5G-N and SP3485EN-L/TR. By type, the board carries 23 resistors, 13 capacitors, 9 connectors, 5 ICs, 5 diodes and 4 jumpers.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
Reviewers can ignore this folder. Same method and scripts as ../../irrigation-layout-oct-2026/claude-tools/ (see its README for detail); everything runs on Mitra's Mac with KiCad 10. out/ folders are scratch.
Main components on the Before rescue2
Before rescue2 bill of materials (BOM)
63 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U1 |
| 1 | XB5353A | SOT-23-5 | U2 |
| 1 | ME6211C33M5G-N ME6211C33M5G | SOT-23-5 | U3 |
| 1 | ESP32-C3-WROOM-02U-N4 | ESP32-C3-WROOM-02U | U4 |
| 1 | SP3485EN-L/TR SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XY308-2.54-5P J2 SENSORS 1-5 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J2 |
| 1 | XY308-2.54-5P J3 RS485 1-5 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J3 |
| 1 | S2B-PH-K-S CELL | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | XY308-2.54-3P GPIO10 | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J5 |
| 1 | XY308-2.54-2P 5V IN (aux) | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J6 |
| 1 | EXT LED | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | XY308-2.54-5P J2 SENSORS 6-10 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J12 |
| 1 | XY308-2.54-5P J3 SPARE 6-10 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J13 |
| 1 | 500mA | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | A/RX | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | B/TX | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
| 1 | TERM | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | TS-1187A-B-A-B RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS-1187A-B-A-B BOOT | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | KT-0603R RED | LED_0603_1608Metric | D1 |
| 2 | KT-0805G GREEN | LED_0805_2012Metric | D2, D4 |
| 1 | SS34 | D_SMA | D3 |
| 1 | PSM712-LF-T7 PSM712 | SOT-23 | D5 |
| 5 | 10uF | C_0603_1608Metric | C1, C2, C4, C5, C8 |
| 6 | 100nF | C_0603_1608Metric | C3, C6, C9, C11, C12, C13 |
| 2 | 1uF | C_0603_1608Metric | C7, C10 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 6 | 4.7k | R_0603_1608Metric | R3, R4, R16, R17, R18, R19 |
| 3 | 1k | R_0603_1608Metric | R5, R6, R15 |
| 2 | 100k | R_0603_1608Metric | R7, R10 |
| 2 | 1M | R_0603_1608Metric | R8, R9 |
| 5 | 10k | R_0603_1608Metric | R11, R12, R13, R14, R20 |
| 2 | 680R | R_0603_1608Metric | R21, R22 |
| 1 | 120R | R_0603_1608Metric | R23 |
Before rescue2 design files
The KiCad project lives in the mitra42/frugal-iot-hw-sensor repository on GitHub; these links point at the commit this page was built from.
Before rescue2: common questions
What microcontroller does the Before rescue2 use?
The Before rescue2 is built around the ESP32-C3-WROOM-02U-N4, from the ESP32 family.
How big is the Before rescue2 PCB?
The Before rescue2 measures 64 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Before rescue2?
63 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Before rescue2 design files?
From the mitra42/frugal-iot-hw-sensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Before rescue2 design in my own project?
The repository has no license, so all rights stay with mitra42. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Before rescue2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in frugal-iot-hw-sensor
ESP32
Frugal iot v02
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before islands
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before stitch
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before polarity
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before silk
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before join
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before pour
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Prerouted
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before import
mitra42
64 × 37 mm63 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k