Frugal iot v02

mitra42·frugal-iot-hw-sensor·frugal_iot_v02/frugal_iot_v02.kicad_pcb

Frugal iot v02 PCB layout, top view — open source ESP32 board by mitra42

About the Frugal iot v02 PCB

Frugal iot v02 is an open source ESP32 PCB design by mitra42, published on GitHub. It is a 2-layer board measuring 64 × 37 mm, with 63 components from 36 distinct parts.

Its main chip is the ESP32-C3-WROOM-02U-N4, from the ESP32 family. Other key parts include the TP4056, XB5353A, ME6211C33M5G-N and SP3485EN-L/TR. By type, the board carries 23 resistors, 13 capacitors, 9 connectors, 5 ICs, 5 diodes and 4 jumpers.

It belongs with the iot & wireless, sensors and power & battery designs in this gallery.

From the project

A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antenna.

A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antenna.

Status: revision 4 (28 Oct 2026): 64 × 37 mm, 2 layers, routed, DRC clean; J4 (cell) and J6 (5 V in) now fitted (D34); JLCPCB files ready for the first order.

ESP32-C3-WROOM-02U U.FL socket for external antenna. USB-C for power and programming (e.g. using a $10 security camera solar panel) Protected charger circuitry for a single LiPo cell (~250mA), will work with really small cells (e.g. salvaged from…

Main components on the Frugal iot v02

Frugal iot v02 bill of materials (BOM)

63 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056
U1
1
XB5353A
U2
1
ME6211C33M5G-N
ME6211C33M5G
U3
1
ESP32-C3-WROOM-02U-N4
U4
1
SP3485EN-L/TR
SP3485EN
U5
2
AO3401A
Q1, Q2
1
TYPE-C-31-M-12
USB-C
J1
1
XY308-2.54-5P
J2 SENSORS 1-5
J2
1
XY308-2.54-5P
J3 RS485 1-5
J3
1
S2B-PH-K-S
CELL
J4
1
XY308-2.54-3P
GPIO10
J5
1
XY308-2.54-2P
5V IN (aux)
J6
1
EXT LED
J7
1
XY308-2.54-5P
J2 SENSORS 6-10
J12
1
XY308-2.54-5P
J3 SPARE 6-10
J13
1
500mA
JP1
1
A/RX
JP2
1
B/TX
JP3
1
TERM
JP4
1
TS-1187A-B-A-B
RESET
SW1
Show 16 more
QtyPartRefs
1
TS-1187A-B-A-B
BOOT
SW2
1
KT-0603R
RED
D1
2
KT-0805G
GREEN
D2, D4
1
SS34
D3
1
PSM712-LF-T7
PSM712
D5
5
10uF
C1, C2, C4, C5, C8
6
100nF
C3, C6, C9, C11, C12, C13
2
1uF
C7, C10
2
5.1k
R1, R2
6
4.7k
R3, R4, R16, R17, R18, R19
3
1k
R5, R6, R15
2
100k
R7, R10
2
1M
R8, R9
5
10k
R11, R12, R13, R14, R20
2
680R
R21, R22
1
120R
R23

Frugal iot v02 design files

The KiCad project lives in the mitra42/frugal-iot-hw-sensor repository on GitHub; these links point at the commit this page was built from.

Frugal iot v02: common questions

What microcontroller does the Frugal iot v02 use?

The Frugal iot v02 is built around the ESP32-C3-WROOM-02U-N4, from the ESP32 family.

How big is the Frugal iot v02 PCB?

The Frugal iot v02 measures 64 × 37 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Frugal iot v02?

63 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Frugal iot v02 design files?

From the mitra42/frugal-iot-hw-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Frugal iot v02 design in my own project?

The repository has no license, so all rights stay with mitra42. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Frugal iot v02 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in frugal-iot-hw-sensor

Similar boards