Numpad
modern-hobbyist·aesir·hermod/hermod-mk2-mx/hermod-numpad/numpad.kicad_pcb
About the Numpad PCB
Numpad is an open source PCB design by modern-hobbyist, published on GitHub under the MIT license. It is a 2-layer board measuring 92.1 × 99.3 mm, with 44 components from 5 distinct parts.
Other key parts include the XC6206PXXXMR-REGULATOR_LINEAR and CR2013-MI2120. By type, the board carries 20 diodes and 4 ICs.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
Hermod Mk. II is a redesign of my original Hermod split keyboard, which in turn was my second keyboard design ever! Some issues that were resolved in this version include: - Better Pin choices for PWM Channels, Mk. I had some issues with timers overlapping - Added a handedness pin - Allows me to avoid using flash to store handedness - Switched to Full Duplex split comms - Mk.I was missing a 5.1kΩ resistor on the split serial line and this switched fixes that. - Switched to STM32G474CETx from the STM32F072CBT6 - More Ram, more flash, more fun. Didn't have enough ram for fun graphics on the LCD…
Main components on the Numpad
Numpad bill of materials (BOM)
44 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ~ | Pogo_2.54mm_5p | U1, U2 |
| 1 | XC6206PXXXMR-REGULATOR_LINEAR ~ | Pogo_2.54mm_5p | U3 |
| 1 | CR2013-MI2120 ~ | Pogo_2.54mm_5p | U4 |
| 20 | KS33_SW_HS ks33_hotswap_1U | KS33_Choc-v2_HS_1U | CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 +12 |
| 20 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
Numpad design files
The KiCad project lives in the modern-hobbyist/aesir repository on GitHub; these links point at the commit this page was built from.
Numpad: common questions
How big is the Numpad PCB?
The Numpad measures 92.1 × 99.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Numpad?
44 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Numpad design files?
From the modern-hobbyist/aesir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Numpad design in my own project?
Yes, under the terms of its MIT license, which modern-hobbyist chose for the repository.
More boards in aesir
STM32
Mist
modern-hobbyist
372.1 × 141.2 mm445 parts2LMIT27STM32
Heimdall
modern-hobbyist
405.4 × 159 mm316 parts4LMIT27STM32
Hermod right
modern-hobbyist
3.6 × 3.3 mm212 parts2LMIT27STM32
Hermod left
modern-hobbyist
3.6 × 3.3 mm196 parts2LMIT27STM32
Modern lcd keyboard
modern-hobbyist
72 × 44.5 mm184 parts2LMIT27STM32
Hermod
modern-hobbyist
189.2 × 139.5 mm177 parts2LMIT27STM32
Paste
modern-hobbyist
3.6 × 3.3 mm72 parts2LMIT27STM32
Stm32G474RETx template
modern-hobbyist
134.5 × 76 mm46 parts2LMIT27STM32
Modern keyboard template
modern-hobbyist
44 × 44.1 mm25 parts2LMIT27
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k