Heimdall

modern-hobbyist·aesir·heimdall/heimdall.kicad_pcb

Heimdall PCB layout, top view — open source STM32 board by modern-hobbyist

About the Heimdall PCB

Heimdall is an open source STM32 PCB design by modern-hobbyist, published on GitHub under the MIT license. It is a 4-layer board measuring 405.4 × 159 mm, with 316 components from 22 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X, XC6206PXXXMR-REGULATOR_LINEAR and CR2013-MI2120. By type, the board carries 141 diodes, 29 capacitors, 8 switches, 4 ICs, 4 resistors and 3 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.

Main components on the Heimdall

Heimdall bill of materials (BOM)

316 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
U1
1
PRTR5V0U2X
U2
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
CR2013-MI2120
TXB0101
U4
1
78171-0004
Conn_01x04
J1
1
CONN_01X05
USB_C_Receptacle_USB2.0
J2
1
Conn_01x05
J3
2
SW_SPST
BOOT1, RST1
1
500mA
F1
124
MX_SW_solder
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +116
4
MX_stab
S1, S6, S7, S8
2
MX_stab
S2, S4
1
MX_stab
S3
1
MX_stab
S5
122
D
D1, D2, D3, D4, D5, D6, D7, D8 +114
2
1N4148
D
D40, D41
17
WS2812B
D120, D121, D122, D123, D124, D125, D126, D127 +9
7
0.1UF
100nF
C1, C3, C4, C5, C6, C7, C8
1
0.1UF
10uF
C2
2
0.1UF
1uF
C9, C10
Show 2 more
QtyPartRefs
19
0.1UF
0.1uF
C11, C12, C13, C14, C15, C16, C17, C18 +11
4
5.1k
R1, R2, R3, R4

Heimdall design files

The KiCad project lives in the modern-hobbyist/aesir repository on GitHub; these links point at the commit this page was built from.

Heimdall: common questions

What microcontroller does the Heimdall use?

The Heimdall is built around the STM32F072CBT6, from the STM32 family.

How big is the Heimdall PCB?

The Heimdall measures 405.4 × 159 mm, has 4 copper layers and is 1.2 mm thick.

How many components are on the Heimdall?

316 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Heimdall design files?

From the modern-hobbyist/aesir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Heimdall design in my own project?

Yes, under the terms of its MIT license, which modern-hobbyist chose for the repository.

Can I test firmware for the Heimdall without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in aesir

Similar boards