Stm32G474RETx template
modern-hobbyist·aesir·stm32G474RETx-template/stm32G474RETx-template.kicad_pcb
About the Stm32G474RETx template PCB
Stm32G474RETx template is an open source STM32 PCB design by modern-hobbyist, published on GitHub under the MIT license. It is a 2-layer board measuring 134.5 × 76 mm, with 46 components from 21 distinct parts.
Its main chip is the STM32G474RETX, from the STM32 family. Other key parts include the PRTR5V0U2X, XC6206PXXXMR-REGULATOR_LINEAR and CR2013-MI2120. By type, the board carries 17 capacitors, 6 diodes, 6 resistors, 4 ICs, 4 LEDs and 2 connectors.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
Hermod Mk. II is a redesign of my original Hermod split keyboard, which in turn was my second keyboard design ever! Some issues that were resolved in this version include: - Better Pin choices for PWM Channels, Mk. I had some issues with timers overlapping - Added a handedness pin - Allows me to avoid using flash to store handedness - Switched to Full Duplex split comms - Mk.I was missing a 5.1kΩ resistor on the split serial line and this switched fixes that. - Switched to STM32G474CETx from the STM32F072CBT6 - More Ram, more flash, more fun. Didn't have enough ram for fun graphics on the LCD…
Main components on the Stm32G474RETx template
Stm32G474RETx template bill of materials (BOM)
46 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PRTR5V0U2X | SOT-143 | U2 |
| 1 | XC6206PXXXMR-REGULATOR_LINEAR XC6206PxxxMR-Regulator_Linear | SOT-23 | U3 |
| 1 | CR2013-MI2120 | CR2013-MI2120 | U4 |
| 1 | STM32G474RETX STM32G474RETx | LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | MMUN2133LT1G | SOT-23-3 | Q3 |
| 1 | 78171-0004 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | CONN_01X05 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 4 | KS33_SW_HS | KS-33_MX-Hotswap-1U | CH1, CH2, CH15, CH16 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | DFU | SW_SPST_TL3342 | RESET1 |
| 4 | CHOC_SK6812MINI-E choc_SK6812MINI-E | LED_choc_6028R | LED1, LED2, LED13, LED14 |
| 4 | D | D_SOD-123 | D1, D2, D15, D16 |
| 2 | 1N4148 | D_SOD-123 | D40, D41 |
| 4 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C2, C13, C14 |
| 7 | 100NF 100nF | C_0402_1005Metric | C104, C105, C106, C107, C108, C109, C110 |
| 3 | 100N 100n | C_0805_2012Metric | C120, C121, C130 |
| 2 | 1UF 1uF | C_0402_1005Metric | C127, C128 |
| 1 | 100nF | C_0402_1005Metric | C129 |
| 3 | 5.1k | R_0402_1005Metric | R1, R2, R5 |
| 1 | 120 | R_0805_2012Metric | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 68K 68k | R_0805_2012Metric | R8, R9 |
Stm32G474RETx template design files
The KiCad project lives in the modern-hobbyist/aesir repository on GitHub; these links point at the commit this page was built from.
Stm32G474RETx template: common questions
What microcontroller does the Stm32G474RETx template use?
The Stm32G474RETx template is built around the STM32G474RETX, from the STM32 family.
How big is the Stm32G474RETx template PCB?
The Stm32G474RETx template measures 134.5 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32G474RETx template?
46 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32G474RETx template design files?
From the modern-hobbyist/aesir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32G474RETx template design in my own project?
Yes, under the terms of its MIT license, which modern-hobbyist chose for the repository.
Can I test firmware for the Stm32G474RETx template without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in aesir
STM32
Mist
modern-hobbyist
372.1 × 141.2 mm445 parts2LMIT27STM32
Heimdall
modern-hobbyist
405.4 × 159 mm316 parts4LMIT27STM32
Hermod right
modern-hobbyist
3.6 × 3.3 mm212 parts2LMIT27STM32
Hermod left
modern-hobbyist
3.6 × 3.3 mm196 parts2LMIT27STM32
Modern lcd keyboard
modern-hobbyist
72 × 44.5 mm184 parts2LMIT27STM32
Hermod
modern-hobbyist
189.2 × 139.5 mm177 parts2LMIT27STM32
Paste
modern-hobbyist
3.6 × 3.3 mm72 parts2LMIT27Numpad
modern-hobbyist
92.1 × 99.3 mm44 parts2LMIT27STM32
Modern keyboard template
modern-hobbyist
44 × 44.1 mm25 parts2LMIT27
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k