Hermod

modern-hobbyist·aesir·modern-split-keyboard-template/hermod.kicad_pcb

Hermod PCB layout, top view — open source STM32 board by modern-hobbyist

About the Hermod PCB

Hermod is an open source STM32 PCB design by modern-hobbyist, published on GitHub under the MIT license. It is a 2-layer board measuring 189.2 × 139.5 mm, with 177 components from 21 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X, XC6206PXXXMR-REGULATOR_LINEAR, CR2013-MI2120 and STM32G474RETX. By type, the board carries 49 capacitors, 37 LEDs, 37 diodes, 5 ICs, 4 resistors and 3 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.

Project Aesir is a collection of custom keyboard PCB designs created using KiCad, aimed at keyboard enthusiasts and DIY makers. Each project in this collection was designed to scratch a specific itch, fill a need, or address a particular problem I had with traditional mechanical keyboards, from a template for a standard keyboard PCB using the STM32F072CBT6 microcontroller to a split ergonomic keyboard design with a modular numpad.

Main components on the Hermod

Hermod bill of materials (BOM)

177 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
U1
1
PRTR5V0U2X
U2
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
CR2013-MI2120
U4
1
STM32G474RETX
TXB0101
U5
1
AO3401A
Q1
1
MMUN2233LT1G
Q2
1
78171-0004
USB_C_Receptacle_USB2.0
J1
1
CONN_01X05
Conn_01x05
J2
1
USB_C_Receptacle_USB2.0
J3
2
SW_SPST
BOOT1, RST1
30
KS33_SW_HS
choc_v1_SW_HS
CH1, CH2, CH3, CH4, CH5, CH6, CH8, CH9 +22
7
KS33_SW_HS
choc_v1_SW_HS
CH7, CH14, CH21, CH28, CH35, CH36, CH37
1
500mA
F1
37
CHOC_SK6812MINI-E
choc_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +29
37
D
D1, D2, D3, D4, D5, D6, D7, D8 +29
7
0.1UF
100nF
C1, C3, C4, C5, C6, C7, C8
1
0.1UF
10uF
C2
2
0.1UF
1uF
C9, C10
39
0.1UF
0.1uF
C11, C12, C13, C14, C15, C16, C17, C18 +31
Show 1 more
QtyPartRefs
4
5.1k
R1, R2, R3, R4

Hermod design files

The KiCad project lives in the modern-hobbyist/aesir repository on GitHub; these links point at the commit this page was built from.

Hermod: common questions

What microcontroller does the Hermod use?

The Hermod is built around the STM32F072CBT6, from the STM32 family.

How big is the Hermod PCB?

The Hermod measures 189.2 × 139.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hermod?

177 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hermod design files?

From the modern-hobbyist/aesir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hermod design in my own project?

Yes, under the terms of its MIT license, which modern-hobbyist chose for the repository.

Can I test firmware for the Hermod without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in aesir

Similar boards