Hermod left

modern-hobbyist·aesir·hermod/hermod-mk3-mx-north/hermod-left/hermod-left.kicad_pcb

Hermod left PCB layout, top view — open source STM32 board by modern-hobbyist

About the Hermod left PCB

Hermod left is an open source STM32 PCB design by modern-hobbyist, published on GitHub under the MIT license. It is a 2-layer board measuring 3.6 × 3.3 mm, with 196 components from 27 distinct parts.

Its main chip is the STM32G474CETx, from the STM32 family. Other key parts include the SRV05-4, XC6206PXXXMR-REGULATOR_LINEAR, CR2013-MI2120 and SN74AHCT1G125DBVR. By type, the board carries 53 capacitors, 42 diodes, 40 LEDs, 8 ICs, 6 resistors and 3 connectors.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.

Hermod Mk. III is a redesign of my original Hermod split keyboard. Some issues that were resolved in this version include: - Updated from the PRTR5V0U2X,215 to the SRV05-4 since the former is out of stock everywhere.

Furthermore, this is the NORTH FACING MX Spacing variant. While it is functionally identically to the Hermod Mk. II, this layout is spaced in a 19.05x19.05 grid, which makes it compatible with the Tai-Hao keycaps highlighted in the ZSA Voyager. Also, the switches are rotated 180• from the previous versions so that the LED's are better aligned with shine-through keycaps.

Main components on the Hermod left

Hermod left bill of materials (BOM)

196 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G474CETx
U1
2
SRV05-4
U2, U9
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
CR2013-MI2120
U4
1
SN74AHCT1G125DBVR
~
U6
1
~
U7
1
SN74AHCT1G125DBVR
U8
1
MMUN2133LT1G
Q3
1
78171-0004
USB_C_Receptacle_USB2.0
J1
1
CONN_01X05
Conn_01x05
J2
1
USB_C_Receptacle_USB2.0
J3
32
KS33_SW_HS
gateron_ks33_hs_1U
CH1, CH3, CH4, CH5, CH6, CH7, CH8, CH10 +24
8
KS33_SW_HS
gateron_ks33_hs_1U
CH2, CH9, CH16, CH23, CH30, CH36, CH37, CH38
2
500mA
F1, F2
1
DFU
RESET1
40
CHOC_SK6812MINI-E
choc_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +32
40
D
D1, D2, D3, D4, D5, D6, D7, D8 +32
2
1N4148
D40, D41
41
0.1UF
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +33
3
0.1UF
100n
C41, C42, C43
Show 7 more
QtyPartRefs
3
0.1UF
100nF
C56, C102, C103
1
0.1UF
10uF
C101
3
100NF
100nF
C104, C105, C108
2
100NF
1uF
C106, C107
3
5.1k
R1, R2, R6
1
120
R7
2
68K
68k
R8, R9

Hermod left design files

The KiCad project lives in the modern-hobbyist/aesir repository on GitHub; these links point at the commit this page was built from.

Hermod left: common questions

What microcontroller does the Hermod left use?

The Hermod left is built around the STM32G474CETx, from the STM32 family.

How big is the Hermod left PCB?

The Hermod left measures 3.6 × 3.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hermod left?

196 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hermod left design files?

From the modern-hobbyist/aesir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hermod left design in my own project?

Yes, under the terms of its MIT license, which modern-hobbyist chose for the repository.

Can I test firmware for the Hermod left without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in aesir

Similar boards