HardLabs

SNES Advanced UV 1-0 new

MouseBiteLabs·Super-Nintendo-Cartridges·Advanced UV/SNES_Advanced_UV_1-0_new.kicad_pcb

SNES Advanced UV 1-0 new PCB layout, top view — open source PIC board by MouseBiteLabs

About the SNES Advanced UV 1-0 new PCB

SNES Advanced UV 1-0 new is an open source PIC PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 116.2 × 79.2 mm, with 47 components from 19 distinct parts.

Its main chip is the PIC12F629, from the PIC family. Other key parts include the 27C322, AS6C1008, 74CBTLV3257, 74LS139 and 74HC74. By type, the board carries 13 ICs, 10 capacitors, 7 resistors, 3 transistors, 3 diodes and 2 test points.

From the project

A collection of Super Nintendo cartridge circuit boards

This is an updated design of my old SNES Advanced cartridge boards, which utilize older UV EPROM chips 27C160 and/or 27C322. Functionally, this design is the same as the older one, but under the hood I have ported the project over from Eagle to KiCad, and heavily cleaned up the schematic and some of the trace routings. This version is also fully open source.

SNES Advanced UV 1-0 new, from the project README
From the project README

Main components on the SNES Advanced UV 1-0 new

PIC12F62927C322AS6C100874CBTLV325774LS13974HC74

SNES Advanced UV 1-0 new bill of materials (BOM)

47 components, 19 distinct parts.

QtyPartRefs
1
PIC12F629
U2A
1
PIC12F629
U2B
4
27C322
U3H, U3L, U4H, U4L
1
AS6C1008
U5
2
74CBTLV3257
U6, U7
3
74LS139
U8H, U8L, U9
1
74HC74
U10
2
2N3904
Q1A, Q2
1
MMBT3904
Q1B
1
SNES_Cartridge
P1
1
CR2025
B1
7
Jumper_2_Open
SJ1, SJ17, SJ18, SJ19, SJ20, SJ21, SJ22
2
TPB1,27
TP14, TP16
3
D
D1, D2, D3
1
22u
C1
9
0.1u
C2, C3, C4, C5, C6, C7, C8, C9 +1
1
1k
R1
2
100k
R2, R6
4
10k
R3, R4, R5, R7

SNES Advanced UV 1-0 new design files

The KiCad project lives in the MouseBiteLabs/Super-Nintendo-Cartridges repository on GitHub; these links point at the commit this page was built from.

SNES Advanced UV 1-0 new: common questions

What microcontroller does the SNES Advanced UV 1-0 new use?

The SNES Advanced UV 1-0 new is built around the PIC12F629, from the PIC family.

How big is the SNES Advanced UV 1-0 new PCB?

The SNES Advanced UV 1-0 new measures 116.2 × 79.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SNES Advanced UV 1-0 new?

47 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the SNES Advanced UV 1-0 new design files?

From the MouseBiteLabs/Super-Nintendo-Cartridges repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SNES Advanced UV 1-0 new design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.

Can I test firmware for the SNES Advanced UV 1-0 new without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in Super-Nintendo-Cartridges

Similar boards