HardLabs

SNES HiROM Flash 1-2

MouseBiteLabs·Super-Nintendo-Cartridges·HiROM Flash/SNES_HiROM_Flash_1-2.kicad_pcb

SNES HiROM Flash 1-2 PCB layout, top view — open source PIC board by MouseBiteLabs

About the SNES HiROM Flash 1-2 PCB

SNES HiROM Flash 1-2 is an open source PIC PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 116.2 × 77.7 mm, with 52 components from 20 distinct parts.

Its main chip is the PIC12F629, from the PIC family. Other key parts include the 74LS139, 29F160, AS6C1008, TPS3613 and 74HC74. By type, the board carries 12 resistors, 11 ICs, 10 capacitors, 5 switches, 2 connectors and 1 transistor.

From the project

A collection of Super Nintendo cartridge circuit boards

This is a new and improved Super Nintendo cartridge circuit board design that is capable of being flashed via the Open Source Cart Reader (OSCR) by sanni. Alternatively, you can also flash the ROM chips before soldering them to the board through the use of a programmer like the T48 programmer with the TSOP48 adapter. This cartridge is made entirely from brand new off the shelf components. No donors are required, and you don't need to rely on AliExpress or eBay for parts!

SNES HiROM Flash 1-2, from the project README
From the project README

Main components on the SNES HiROM Flash 1-2

PIC12F62974LS13929F160AS6C1008TPS361374HC74

SNES HiROM Flash 1-2 bill of materials (BOM)

52 components, 20 distinct parts.

QtyPartRefs
1
PIC12F629
U1A1
1
PIC12F629
U1B1
2
74LS139
U5, U7
4
29F160
U8, U9, U12, U13
1
AS6C1008
U10
1
TPS3613
U11
1
74HC74
U14
1
2N7002
Q1
1
Conn_02x03_Odd_Even
J1
1
SNES_Cartridge
P1
1
Battery_Cell
BT1
10
0
RS2A1, RS2B1, RS2C1, RS2D1, RS3, RS4A1, RS4B1, RS5 +2
1
SW_DIP_x04
SW2
2
SW_SPST
SW3, SW5
2
SW_DIP_x02
SW4, SW6
10
0.1u
C1, C5, C7, C8, C9, C10, C11, C12 +2
2
10k
R1, R13
8
100k
R4, R5, R8, R9, R10, R11, R14, R15
1
130k
R6
1
49.9k
R7

SNES HiROM Flash 1-2 design files

The KiCad project lives in the MouseBiteLabs/Super-Nintendo-Cartridges repository on GitHub; these links point at the commit this page was built from.

SNES HiROM Flash 1-2: common questions

What microcontroller does the SNES HiROM Flash 1-2 use?

The SNES HiROM Flash 1-2 is built around the PIC12F629, from the PIC family.

How big is the SNES HiROM Flash 1-2 PCB?

The SNES HiROM Flash 1-2 measures 116.2 × 77.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SNES HiROM Flash 1-2?

52 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the SNES HiROM Flash 1-2 design files?

From the MouseBiteLabs/Super-Nintendo-Cartridges repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SNES HiROM Flash 1-2 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.

Can I test firmware for the SNES HiROM Flash 1-2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in Super-Nintendo-Cartridges

Similar boards